Thack82 Posted June 15, 2014 Report Share Posted June 15, 2014 When is it? If I'm back together by then I'll be there! Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted June 15, 2014 Report Share Posted June 15, 2014 When is it? If I'm back together by then I'll be there!September 24-28th. You threw down the challenge. ...it's up to YOU to be there and be ready. ...none of this " if I'm back together " bs. Sent from a van down by the river Quote Link to comment Share on other sites More sharing options...
Thack82 Posted June 15, 2014 Report Share Posted June 15, 2014 Zilla I'm done arguing with you. Have you seen my clutch basket??? My basket wasn't machined by the same person or even out of the same material. Every clutch kit I've seen had steel plates and fibers, regardless most clutch kits have steel plates. The additional rotating mass can be eliminated by removing a small amount of weight from the flywheel. So we're talking about adding a additional 1.2lbs to over all weight of the quad, and I would think that additional pound would be a good trade for a indestructible clutch basket that you'll never have to worry about grooving or breaking. I'm not trying to sell you or anybody else a steel basket. I have one and I like it but I don't get a dime when he sells one so what is it to me? Lets see what Tim says in his product review. Quote Link to comment Share on other sites More sharing options...
Thack82 Posted June 15, 2014 Report Share Posted June 15, 2014 Okay, I'll see you there. Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted June 15, 2014 Report Share Posted June 15, 2014 Okay, I'll see you there.Sounds good. you'll have a blast. Sent from a van down by the river Quote Link to comment Share on other sites More sharing options...
Thack82 Posted June 15, 2014 Report Share Posted June 15, 2014 I will be fun for sure. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted June 16, 2014 Report Share Posted June 16, 2014 $10 says Thacker doesn't show up. Quote Link to comment Share on other sites More sharing options...
Nightmare Posted June 16, 2014 Report Share Posted June 16, 2014 Oh, and Tyler as far as me threatening you and talking about fighting, that's a flat out lie! The member of the BHQ FB Group that threatened to "box your ears" if he ever saw you in person is still a member of the Facebook Group. I never made any type of physical threat to or about you or anybody else.Maybe not but you do have some weird obsession with him being that you can't keep his name out of your mouth. Sent from my HTC One_M8 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Coupelx Posted June 16, 2014 Report Share Posted June 16, 2014 I accept your challenge. Be there this year . I'll pay 50.00 towards your gas just to sand blast your raggedy-ass bike. Sent from a van down by the river I want in on this- I have $20 that says thackfuck bitches out on the race like Zillafreak did on me, Although zilla actually showed up to the ride to swing on shearers nuts. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted June 16, 2014 Report Share Posted June 16, 2014 Lane at Driveline clutch turned me on to a shop (A&S racing) that machines your stock inner and PP quite reasonably. Says they hold up in big motors just fine. I am not the first to come up with it, its been done for years but no one gives out details and its possible everyone does it a little different. Quote Link to comment Share on other sites More sharing options...
Thack82 Posted June 16, 2014 Report Share Posted June 16, 2014 I'm going to do everything on my power to make it. Win or loose I'll give it all my bikes got. Quote Link to comment Share on other sites More sharing options...
Thack82 Posted June 16, 2014 Report Share Posted June 16, 2014 I looked at my stock inner hub and I didn't think there was enough material to machine out for the extra plate so I bought Hinson's 8-Plate Billet Inner Hub, Hard Anodized Backing Plate, and a set of UPP Cushions. So far I've had good luck out of everything. I'm having a Billet 2nd Gear Kit installed, under cutting 3-6, and having the Shift Drum Bearing Mod done while I'm building having the new motor built. The last thing I want to do is get into shifting issues again. Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted June 16, 2014 Report Share Posted June 16, 2014 Billet 2nd gear seems overkill, but hey what do I know. Quote Link to comment Share on other sites More sharing options...
Thack82 Posted June 16, 2014 Report Share Posted June 16, 2014 Who do I have a weird obsession with Nightmare350? My name was thrown around a lot before I even commented on the thread. I don't want to start shit with any of you and I haven't posted anything for almost a year, but I can only stand by and not reply or defend myself for so long when I'm being called names, made fun of, and bashed. If my name was left out this I wouldn't have replied to this thread. If the people that are running me down and talking about me will stop I'll delete my BHQ account. You guys don't know how many times I've wished I had never joined in first place. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted June 16, 2014 Report Share Posted June 16, 2014 anything over 50hp should have a billet 2nd gear. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.