4wh331in6 Posted June 8, 2014 Report Share Posted June 8, 2014 Running with 200 mains 25 pilot and needle center position at 670 ft above sea level. Also new uni filter and bored 30 over wiseco pistons. Whenever I install air box cover it Bogs Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted June 8, 2014 Report Share Posted June 8, 2014 Your snorkel has a nest in it. Quote Link to comment Share on other sites More sharing options...
4wh331in6 Posted June 8, 2014 Author Report Share Posted June 8, 2014 I removed snorkel no nest but runs good without snorkel Quote Link to comment Share on other sites More sharing options...
4wh331in6 Posted June 8, 2014 Author Report Share Posted June 8, 2014 I'm not racing this thing I just don't want to burn up new top end Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted June 8, 2014 Report Share Posted June 8, 2014 So your bike is completely stock with the exception of the uni filter in your airbox w/out the lid and .030" over pistons? Quote Link to comment Share on other sites More sharing options...
VoOK Posted June 8, 2014 Report Share Posted June 8, 2014 200 mains? Seems very low to me. Quote Link to comment Share on other sites More sharing options...
v2004banshee Posted June 8, 2014 Report Share Posted June 8, 2014 How hot is it out Quote Link to comment Share on other sites More sharing options...
4wh331in6 Posted June 8, 2014 Author Report Share Posted June 8, 2014 Yes stock no snorkel lid is on its like 80 degrees Quote Link to comment Share on other sites More sharing options...
4wh331in6 Posted June 8, 2014 Author Report Share Posted June 8, 2014 Unplugged tors was acting up badly unplugging them fixed the uncontrollable wot getting caps soon Runs Pretty Good Except Had To Remove Snorkel Quote Link to comment Share on other sites More sharing options...
4wh331in6 Posted June 8, 2014 Author Report Share Posted June 8, 2014 I thought they were kinda low but the starving for air thing Quote Link to comment Share on other sites More sharing options...
4wh331in6 Posted June 8, 2014 Author Report Share Posted June 8, 2014 Gonna buy another couple sets of plugs and do a chop Quote Link to comment Share on other sites More sharing options...
4wh331in6 Posted June 8, 2014 Author Report Share Posted June 8, 2014 Yes stock. just snorkel removed maybe reeds they are not stock but have stock type Reed stops could be Boyeson stock cage Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted June 9, 2014 Report Share Posted June 9, 2014 Turn airscrews all the way in and then turn them out 1.5 turns. Do you have idle screws installed? Are the carb slides sync'd and lifting off at the same time when you push the throttle? For your mods your jets are fine but you need to add fuel with the airscrews because your lid is off. Quote Link to comment Share on other sites More sharing options...
4wh331in6 Posted June 9, 2014 Author Report Share Posted June 9, 2014 No I do not have idle screws installed I was using the tors screws to set idle. I will try that setting again thanks will order tors elimination kit with screws Quote Link to comment Share on other sites More sharing options...
4wh331in6 Posted June 9, 2014 Author Report Share Posted June 9, 2014 I will make sure they are still synced Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.