Power_Man Posted June 2, 2014 Report Share Posted June 2, 2014 We bought two Tors eliminator kits for identical banshee's. First one we did was my quad. Worked like a charm. Runs good idles fine. DONE Second kit went on friends. installation went smoother than mine. Fire it up and right side cylinder is missing. you can see the right exhaust will stop blowing smoke every now and It also bogs when trying to rev it up. We have pulled the carbs off and re cleaned, inspected. Triple checked everything. We didn't change jets or anything. simply just removed TORS. We swapped plug boots. Problem stayed on right cylinder. anyone else have similar problem? Quote Link to comment Share on other sites More sharing options...
VoOK Posted June 2, 2014 Report Share Posted June 2, 2014 Intake gasket leak? Quote Link to comment Share on other sites More sharing options...
Power_Man Posted June 2, 2014 Author Report Share Posted June 2, 2014 Tried to edit my first post, but i should of said plus are almost dripping wet. Quote Link to comment Share on other sites More sharing options...
wayne_smith97 Posted June 2, 2014 Report Share Posted June 2, 2014 Did you sync the carbs afterwards Quote Link to comment Share on other sites More sharing options...
Sandking Posted June 2, 2014 Report Share Posted June 2, 2014 Check the right side rubber manifold under the metal band if torn you have an air leak Sent from my SCH-I535 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Power_Man Posted June 2, 2014 Author Report Share Posted June 2, 2014 Did you sync the carbs afterwards Yes sir. Check the right side rubber manifold under the metal band if torn you have an air leak Sent from my SCH-I535 using Tapatalk Will check when i get home and report back. Quote Link to comment Share on other sites More sharing options...
four2err0r Posted June 2, 2014 Report Share Posted June 2, 2014 My TORS eliminator came with two new caps, so how would switching be attributed to this? Unless I'm misunderstanding what you're saying. Sent from my SAMSUNG-SGH-I337 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Power_Man Posted June 2, 2014 Author Report Share Posted June 2, 2014 My TORS eliminator came with two new caps, so how would switching be attributed to this? Unless I'm misunderstanding what you're saying. Sent from my SAMSUNG-SGH-I337 using Tapatalk Yes, he has me confused as well. Come with new tops and cables. The only thing that stays the same are slides and carbs. Quote Link to comment Share on other sites More sharing options...
hp2000 Posted June 2, 2014 Report Share Posted June 2, 2014 Student4life probably meant carb slides and not carb tops. You can't have the slides in the wrong carb or the wrong bowl those 2 parts are specific to each carb. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Power_Man Posted June 2, 2014 Author Report Share Posted June 2, 2014 How do you tell which slide goes in which carb? Quote Link to comment Share on other sites More sharing options...
BUILDER Posted June 3, 2014 Report Share Posted June 3, 2014 The half moon cut out faces the rear of the carb if they are in wrong it will run like shit Quote Link to comment Share on other sites More sharing options...
registered user Posted June 3, 2014 Report Share Posted June 3, 2014 toomey site says you suppose to leave the crossover tube on. just sayin Quote Link to comment Share on other sites More sharing options...
Joeladm Posted June 3, 2014 Report Share Posted June 3, 2014 The slide for the left carb has a slot cut on the top on the front and back side. Quote Link to comment Share on other sites More sharing options...
Joeladm Posted June 3, 2014 Report Share Posted June 3, 2014 here is a pic of the slide that goes in the left side Quote Link to comment Share on other sites More sharing options...
Joeladm Posted June 6, 2014 Report Share Posted June 6, 2014 How's it running, get it figured out?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.