360Bansheelab Posted May 28, 2014 Report Share Posted May 28, 2014 Ok I no this page is full of knowledge and need some help. I just restored a banshee with a 10mil Cheetah in it. I removed the PV and had the motor gone through by a local shop. On the second time out it began to run like crap, so I took it back to the shop. They tore into it and discovered the one of my reeds (VForce 2) had a broken pedal. With further review they discovered that one of the screws (typical) came loose from the reed and took out my piston and dome. Where is where I need advice... It has 125mm rods, 72.5 pistons with 18mm wrist pins. I have been told that pistons with 18mm wrist pins are obsolete and only a couple left in existence and cost $350-400.00 a pair. Is that true? Does anyone know of a vendor that I can find these? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
m671054 Posted May 28, 2014 Report Share Posted May 28, 2014 Whats the number on piston? Have you called wiseco? Quote Link to comment Share on other sites More sharing options...
360Bansheelab Posted May 28, 2014 Author Report Share Posted May 28, 2014 The bike is still at the shop, I should have it back in a few days so I can get the number off the piston then. I haven't called anyone yet, just thought I would ask around in the meantime. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.