KX500 Posted May 27, 2014 Report Share Posted May 27, 2014 (edited) So, I am getting out of this hobby for a while. I began swapping everything over to a different frame, the old one had some cracks and rust. This is a J-Arm frame. Its a 370 long rod. Not too sure whats all done to it other than that, I was told it is drag ported by a company up near Fallon NV. I have enough parts, minus a second frame and motor to build two quads. I have triple buffed fronts on spindle mounts. Triple buffed 10 cup haulers on drag cut wheels. I also have some play tires and paddles that will go with it. I also have CPI inframes as well.. Everything must go. O.B.O. PARTING THIS BIKE OUT NOW!!!!!!!J-Arm frame and complete suspension.Complete set of extra shocks and arms.Two stock swingarms and axles.One +6 Stellar arm and polished carrier with stock axle.Extra Stator because I think the one in it is giving up.Extra set of plastics.Extra seat.Inframe CPIs with silencers.FMF pipes and silencers.I am sure there is a bunch more, but don't remember everything. I am looking for about $4500, OBO, or trades for everything. Anything I have Banshee related in the garage has to go. Email me at m.penfield@yahoo.com or text me at 916-873-7600 Located in Roseville CA, 95678 I am also looking for a '60-'87 Chevy Regular cab pickup, 4wd, preferably a big block truck, but open to offers, or other trades. Edited June 2, 2014 by NYUK Quote Link to comment Share on other sites More sharing options...
Buffalo-Banshee Posted May 27, 2014 Report Share Posted May 27, 2014 If you decide to part it out ide like the cpi pipes and silencers Quote Link to comment Share on other sites More sharing options...
Factory350 Posted May 27, 2014 Report Share Posted May 27, 2014 I'd be interested in wheels and tires if you decide to part. Quote Link to comment Share on other sites More sharing options...
JOSE_FBR7777 Posted May 27, 2014 Report Share Posted May 27, 2014 Would you sale the extra shocks? Quote Link to comment Share on other sites More sharing options...
dadebikelife Posted May 27, 2014 Report Share Posted May 27, 2014 lmk for the seat Quote Link to comment Share on other sites More sharing options...
andres1 Posted May 28, 2014 Report Share Posted May 28, 2014 ill take cylinders and pistons if u decide to part it out, I will need to know the compression and size of pistons first. thanks Quote Link to comment Share on other sites More sharing options...
BANSHEEBEEFM2M Posted May 28, 2014 Report Share Posted May 28, 2014 No disrespect but complete drag bikes with cubs big motors etc are going for 35 to 4gs running and ready Sent from my SCH-R970C using Tapatalk Quote Link to comment Share on other sites More sharing options...
beastieboymiked Posted May 28, 2014 Report Share Posted May 28, 2014 Price on spindle mounts? Quote Link to comment Share on other sites More sharing options...
m671054 Posted May 28, 2014 Report Share Posted May 28, 2014 http://www.atvdragracers.com/forum/sale/6712-leaving-hobby-banshee-has-go.html only 2 1/2 years later. Same price same story. Doubt full there will be a part out or much needed price change. To bad to cause i could use some parts and its local. Quote Link to comment Share on other sites More sharing options...
BANSHEEBEEFM2M Posted May 28, 2014 Report Share Posted May 28, 2014 Couldn't get 45 for it if it was running Sent from my SCH-R970C using Tapatalk Quote Link to comment Share on other sites More sharing options...
BwtII Posted May 28, 2014 Report Share Posted May 28, 2014 How much for electrical stuff if you decide to part out like Cdi and stator Quote Link to comment Share on other sites More sharing options...
KX500 Posted May 28, 2014 Author Report Share Posted May 28, 2014 I am open to offers, I haven't gotten any real offers for anything. I don't want to part out, but, money talks. If I can get rid of the bulk of it, I wouldn't mind sitting on some of it. This literally hasn't changed since the first time it was posted for sale, It has been in my trailer since then. I just pulled it out a couple weeks ago with the intent to finish it. I just don't want to deal with it. PM me an offer on what ever you want, worst case is I say no. Quote Link to comment Share on other sites More sharing options...
KX500 Posted May 30, 2014 Author Report Share Posted May 30, 2014 I am parting out. PM me if your interested in anything. Quote Link to comment Share on other sites More sharing options...
BwtII Posted May 30, 2014 Report Share Posted May 30, 2014 Interested in Cdi and stator Quote Link to comment Share on other sites More sharing options...
BwtII Posted May 30, 2014 Report Share Posted May 30, 2014 Also interested in headlights Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.