mailman Posted May 26, 2014 Report Share Posted May 26, 2014 I am doing a complete part out of this 2004 421 Cub. It is loaded with goodies. I will be adding parts and prices in the next few days. Here are some parts to get this going. Prices don't include shipping or fees. Over ride trans N Down 1-5 $150................Has some damage.....a couple of teeth or gone on a gear, the idler gear is worn, the shaft is bent. Great deal if you can repair yourself. Comes with forks and drum. Cut by Ohton I believe. I have more pics if you want to see some more. Just PM me if you want more pics or if you want something. Billet basket $100 +10 Swing Arm $200 Works front shocks $200 Braking Rear Wave Rotor $45 +2+4 extended rear axle $120 V force 3 Reeds $100 Slingshot Lockup $150 with heavy springs Pancake bearing for clutch $25 Trail Tech Bar Mount for Oversized bars with key and switch $40 Cascade Billet Shifter $25.........the threads are damaged so the bolt runs a nut on the back side...........splines are good Black PC Dog bone $25 Polished Roundhouse bearing carrier with brake plate $80 Almost new front dirt tires and stock rims $120 Razor type front sand tires $100 Wire Harness $35 Quote Link to comment Share on other sites More sharing options...
mailman Posted May 26, 2014 Author Report Share Posted May 26, 2014 Quote Link to comment Share on other sites More sharing options...
mailman Posted May 26, 2014 Author Report Share Posted May 26, 2014 Quote Link to comment Share on other sites More sharing options...
mailman Posted May 26, 2014 Author Report Share Posted May 26, 2014 (edited) Edited May 26, 2014 by mailman Quote Link to comment Share on other sites More sharing options...
mailman Posted May 26, 2014 Author Report Share Posted May 26, 2014 (edited) Edited May 26, 2014 by mailman Quote Link to comment Share on other sites More sharing options...
Dmax7076 Posted May 26, 2014 Report Share Posted May 26, 2014 Cylinders good ?? Quote Link to comment Share on other sites More sharing options...
Dixie normus Posted May 26, 2014 Report Share Posted May 26, 2014 Pm on axle Quote Link to comment Share on other sites More sharing options...
mailman Posted May 26, 2014 Author Report Share Posted May 26, 2014 PM replied on axle. I am not sure on the brand. Does anyone know or recognize the part number listed on it? I thought it was a Lonestar but I am not certain. Cylinders are good but may be sold. I will know today for sure Dmax. Quote Link to comment Share on other sites More sharing options...
Dixie normus Posted May 26, 2014 Report Share Posted May 26, 2014 dIBS on a arms!! Quote Link to comment Share on other sites More sharing options...
Dmax7076 Posted May 26, 2014 Report Share Posted May 26, 2014 dam my luck Quote Link to comment Share on other sites More sharing options...
Bdickey Posted May 26, 2014 Report Share Posted May 26, 2014 P.M me a price on the crank. Quote Link to comment Share on other sites More sharing options...
mailman Posted May 26, 2014 Author Report Share Posted May 26, 2014 Crank is pending. A arms are available for only $200 if anyone wants them. The joints are good but 3 boots are torn and should be replaced. PM me if you want them. Quote Link to comment Share on other sites More sharing options...
mailman Posted May 26, 2014 Author Report Share Posted May 26, 2014 Here are some more parts from this bike. PM me if you want anything or need more pics or info. Thank you. Revalved and resprung oem shock for +4 swinger 180-200 lbs. $100 Chain guide lower one $15 Chain slider Upper $15 OEM Black rear hubs $30 OEM Coil $20 OEM CDI Black Box 2004 model $75 Clutch perch and lever $10 Complete Rear Brake setup with Cascade billet block off plate, stainless steel extended brake line Complete setup $80 21 cc Domes.......No markings to indicate 21cc but that is what I was told.......$40 Quote Link to comment Share on other sites More sharing options...
mailman Posted May 26, 2014 Author Report Share Posted May 26, 2014 More parts!!!! OEM Bar Switches $20 OEM Swing arm pivot bolt and nut....Great Condition....$20 Black OEM Grab bar $20 Stock carbs with cable and Tors deleted.........$50 OEM Thumb throttle......Great Conditon $25 UNI clamp on foam filters for oem carbs $20 Quote Link to comment Share on other sites More sharing options...
hp2000 Posted May 26, 2014 Report Share Posted May 26, 2014 Do you have the idle screws for the stock carbs ? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.