DragBikeParting Posted May 19, 2014 Report Share Posted May 19, 2014 Parting out these 3 Drag Bikes. Trust us not what we want to do but our kid is heavy into motocross and doing well. Time to not be selfish. Starting left to right: (Left) Primer Red one is a 10Mil Cheetah cub 465cc on Alky: Dyno'd 114 HP Billet 10mil crank Nate McCoy Drag ported Cheetah cub, Wosner pistons, Noss Machine cool head with custom domes.....$2250 with crank Vforce 2 Reeds $125 OEM stator $125 Clean bored stock cases $200 White Knuckle Billet manifold $125 1st down 2-5 Dunable override: $225 Shearer BB OOF Left side pipes: $550 Packard Lectron Alky carbs 40's : $675 Pods: $45 Dyna Ignition: $275 Aluminum Gas tank 1.5gal: $ 150 SOLD +10chrome ladder bar swingarm: $350 JJ&A Carrier: $70 SOLD JJ&A Drag Axle: $400 SOLD 10in extended front stock and lightened frame, Stellar Chromoly J-Arms, and Custom Steering Stem, and radiator, aprox 60% chromoly,Powder Coat Black no title: $800 Sling Shot clutch: $275 Front Marvins 14.5": $250 Rear Marvins 14.5": $130 SOLD Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Rear Paddles 22x11x8 10paddles triple buff: $450 Cut Down Black vinyl seat: $100 Misc internals and externals (chain guides,plastic, tensioners..etc): PM (Center) Blue one is a 4mil Cheetah cub 421cc on gas: Dyno'd 105HP Parting this motor: 4mil Hot Rod Crank: $250 Nate McCoy Drag Ported Cheetah Cub *polished*: (pistons and domes) $1400 SOLD Pro Design Cool Head: $75 OEM Stator with timing plates: $150 Vforce 2 reeds: $150 Clean stock Cases: $200 1st down 2-5 Dunable override:$225 In Frame BB Shearer Pipes Chrome: $500 SOLD +8 Oval housing Top Dog chrome swing arm with flame design:$400 SOLD Torch works aluminum radiator, slight bend from crash but works fine and is nice: $150 Roll Design Steering Stem with LSR bar clamp: $ 300 Chrome Clutch case: $100 SOLD Hinson full basket 7 disc clutch straight cut gear and flat bearing: $600 MOD QUAD Flame design Chrome stator cover: $ 150SOLD Chrome J-arms made by custom creations: $275 Billet Manifold for 35's: $75 Aluminum tie rods: $25 Lightened Stock Frame, Black no title: $400 22x11x8 Extreme buff's with 8 paddles: $450 Trimmed Blue plastics:$150 Custom covered seat with iron cross: $100 Billet Front hubs LSR no front brakes: $150 40mm axle carrier: $70 SOLD Revalved Rear OEM shock done by TCS Hillshooter shock: $300 20" Front smoothies: $275 SOLD Misc internals and externals (chain guides, tensioners..etc): PM (Right) Green One is a 4mil Supercub 485cc on Alky: Dyno'd 114HP Noss Machine Super Cub Cool Head with custom to the cylinder domes Nate McCoy Drag ported Cylinder *polished* 73 bore instead of 72:.....$1800 with crank Neutral Down dunable 1-5 override: $225 Lock up: $50 OEM stator: $125 Clean Cases match ported bored for Super Cub cylinder: $200 39 PWK Alky Carbs, need new power jets, I can buy some and put them in whatever works: $450 Pods:$45 BB OOF Left side CPI's: $500 +8 ladder bar chromoly swing arm a little ruff: $200 SOLD Custom Creations drag chrome A-arms: $ 450 Aluminum tie rods: $25 White Knuckle Drag Axle: $ 450 SOLD Aluminum Radiator: $ 125 SOLD Chrome Stock Steering Stem: $100SOLD Front Marvin Shaws 14": $250 Rear Marvin Shaw 13": $130 SOLD 22x11x8 10 paddle Extreme Haulers Triple Buffs: $450 Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Mod Quad Polished Stator cover: $150SOLD Polished Clutch Cover White knuckle: $150 Super cut down vinyl/fabric black checkerboard seat: $100 SOLD Lightened Stock frame metallic purple has title: $500 Misc internals and externals (chain guides, tensioners..etc):PM NOTHING INCLUDES SHIPPING. PLEASE GIFT OR COVER PAYPAL FEES. PM me your number and what you want a picture of or just PM for questions. Quote Link to comment Share on other sites More sharing options...
aleyesonme Posted May 19, 2014 Report Share Posted May 19, 2014 Will u just let go of the chromoly j arms? Sent from my LG-P769 using Tapatalk Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 19, 2014 Author Report Share Posted May 19, 2014 Yes Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 19, 2014 Author Report Share Posted May 19, 2014 The chrome ones. Not the ones on the drag frame Quote Link to comment Share on other sites More sharing options...
Dmax7076 Posted May 19, 2014 Report Share Posted May 19, 2014 Is that complete motor without reeds and carbs Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 19, 2014 Author Report Share Posted May 19, 2014 Pm d u dmax Quote Link to comment Share on other sites More sharing options...
bansheerilla Posted May 19, 2014 Report Share Posted May 19, 2014 A real good solid guy to deal with on buying parts and all good parts as posted. Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 19, 2014 Author Report Share Posted May 19, 2014 Hey guys I have to log off for a while and get some stuff shipped out. Please PM me with your interest and I will get back with the questions in a couple of hours. Thanks for looking Quote Link to comment Share on other sites More sharing options...
ybslo2 Posted May 19, 2014 Report Share Posted May 19, 2014 Pm me on billet crank how much Quote Link to comment Share on other sites More sharing options...
aleyesonme Posted May 19, 2014 Report Share Posted May 19, 2014 I wasn't thinking. ....forgot the j arms won't fit on my frame.. Sent from my LG-P769 using Tapatalk Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 19, 2014 Author Report Share Posted May 19, 2014 Pm me on billet crank how much I tried PMing you says you cannot receive any new messages Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 19, 2014 Author Report Share Posted May 19, 2014 Alright were back....go for it Quote Link to comment Share on other sites More sharing options...
ybslo2 Posted May 19, 2014 Report Share Posted May 19, 2014 Text me at 3212510789 thnks Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 20, 2014 Author Report Share Posted May 20, 2014 Parting out these 3 Drag Bikes. Trust us not what we want to do but our kid is heavy into motocross and doing well. Time to not be selfish. Starting left to right: (Left) Primer Red one is a 10Mil Cheetah cub 465cc on Alky: Dyno'd 114 HP ◾Billet 10mil crank ◾Nate McCoy Drag ported Cheetah cub, Wosner pistons, Noss Machine cool head with custom domes.....$2250 with crank ◾Vforce 2 Reeds $125 ◾OEM stator $125 ◾Clean bored stock cases $200 ◾White Knuckle Billet manifold $125 ◾1st down 2-5 Dunable override: $225 ◾Shearer BB OOF Left side pipes: $500 ◾Packard Lectron Alky carbs 40's : $675 ◾Pods: $45 ◾Dyna Ignition: $275 ◾Aluminum Gas tank 1.5gal: $ 150 SOLD ◾+10chrome ladder bar swingarm: $350 ◾JJ&A Carrier: $70 SOLD ◾JJ&A Drag Axle: $400 SOLD ◾10in extended front stock and lightened frame, Stellar Chromoly J-Arms, and Custom Steering Stem, and radiator, aprox 60% chromoly,Powder Coat Black no title: $800 ◾Sling Shot clutch: $275 ◾Front Marvins 14.5": $250 ◾Rear Marvins 14.5": $130 SOLD ◾Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 ◾Rear Paddles 22x11x8 10paddles triple buff: $450 ◾Cut Down Black vinyl seat: $100 ◾Misc internals and externals (chain guides,plastic, tensioners..etc): PM (Center) Blue one is a 4mil Cheetah cub 421cc on gas: Dyno'd 105HP Parting this motor: ◾4mil Hot Rod Crank: $250 ◾Nate McCoy Drag Ported Cheetah Cub *polished*: (pistons and domes) $1400 SOLD ◾Pro Design Cool Head: $75 ◾OEM Stator with timing plates: $150 ◾Vforce 2 reeds: $150 ◾Clean stock Cases: $200 ◾1st down 2-5 Dunable override:$225 ◾In Frame BB Shearer Pipes Chrome: $500 SOLD ◾+8 Oval housing Top Dog chrome swing arm with flame design:$400 SOLD ◾Torch works aluminum radiator, slight bend from crash but works fine and is nice: $150 ◾Roll Design Steering Stem with LSR bar clamp: $ 300 ◾Chrome Clutch case: $100 SOLD ◾Hinson full basket 7 disc clutch straight cut gear and flat bearing: $600 ◾MOD QUAD Flame design Chrome stator cover: $ 150SOLD ◾Chrome J-arms made by custom creations: $275 SOLD ◾Billet Manifold for 35's: $75 ◾Aluminum tie rods: $25 SOLD ◾Lightened Stock Frame, Black no title: $400 ◾22x11x8 Extreme buff's with 8 paddles: $450 ◾Trimmed Blue plastics:$150 ◾Custom covered seat with iron cross: $100 ◾Billet Front hubs LSR no front brakes: $150 ◾40mm axle carrier: $70 SOLD ◾Revalved Rear OEM shock done by TCS Hillshooter shock: $300 ◾20" Front smoothies: $275 SOLD ◾Misc internals and externals (chain guides, tensioners..etc): PM (Right) Green One is a 4mil Supercub 485cc on Alky: Dyno'd 114HP ◾Noss Machine Super Cub Cool Head with custom to the cylinder domes ◾Nate McCoy Drag ported Cylinder *polished* 73 bore instead of 72:.....$1800 with crank ◾Neutral Down dunable 1-5 override: $225 ◾Lock up: $50 ◾OEM stator: $125 ◾Clean Cases match ported bored for Super Cub cylinder: $200 ◾39 PWK Alky Carbs, need new power jets, I can buy some and put them in whatever works: $450 ◾Pods:$45 ◾BB OOF Left side CPI's: $500 ◾+8 ladder bar chromoly swing arm a little ruff: $200 SOLD ◾Custom Creations drag chrome A-arms: $ 375 ◾Aluminum tie rods: $25SOLD ◾White Knuckle Drag Axle: $ 450 SOLD ◾Aluminum Radiator: $ 125 SOLD ◾Chrome Stock Steering Stem: $100SOLD ◾Front Marvin Shaws 14": $250 ◾Rear Marvin Shaw 13": $130 SOLD ◾22x11x8 10 paddle Extreme Haulers Triple Buffs: $450 ◾Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 ◾Mod Quad Polished Stator cover: $150SOLD ◾Polished Clutch Cover White knuckle: $150 ◾Super cut down vinyl/fabric black checkerboard seat: $100 SOLD ◾Lightened Stock frame metallic purple has title: $500 ◾Misc internals and externals (chain guides, tensioners..etc):PM NOTHING INCLUDES SHIPPING. PLEASE GIFT OR COVER PAYPAL FEES. We have piles of stock parts too. Just ask. PM me your number and what you want a pic or info text 530-748-8361 or PM Quote Link to comment Share on other sites More sharing options...
rliter Posted May 20, 2014 Report Share Posted May 20, 2014 I'm interested in the override can u txt or call me at 8127016514 thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.