DragBikeParting Posted May 17, 2014 Report Share Posted May 17, 2014 Parting out these 3 Drag Bikes. Trust us not what we want to do but our kid is heavy into motocross and doing well. Time to not be selfish. Starting left to right: (Left) Primer Red one is a 10Mil Cheetah cub 465cc on Alky: Dyno'd 114 HP Want to try and sell motor as a complete first asking: $5000obo Billet 10mil crank Nate McCoy Drag ported Cheetah cub, Wosner pistons, Noss Machine cool head with custom domes Vforce 2 Reeds OEM stator Clean bored stock cases White Knuckle Billet manifold 1st down 2-5 Dunable override: Shearer BB OOF Left side pipes: $550 Packard Lectron Alky carbs 40's : $750 Pods: $45 Dyna Ignition: $275 Aluminum Gas tank 1.5gal: $ 150 +10chrome ladder bar swingarm: $350 JJ&A Drag Axle: $400 10in extended front stock and lightened frame, Stellar Chromoly J-Arms, and Custom Steering Stem, and radiator, aprox 60% chromoly,Powder Coat Black no title: $800 Sling Shot clutch: $275 Front Marvins 14.5": $250 Rear Marvins 14.5": $130 Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Rear Paddles 22x11x8 10paddles triple buff: $450 Cut Down Black vinyl seat: $100 Misc internals and externals (chain guides,plastic, tensioners..etc): PM (Center) Blue one is a 4mil Cheetah cub 421cc on gas: Dyno'd 105HP Parting this motor: 4mil Hot Rod Crank: $250 Nate McCoy Drag Ported Cheetah Cub *polished*: (pistons and domes) $1400 Pro Design Cool Head: $75 OEM Stator with timing plates: $150 Vforce 2 reeds: $150 Clean stock Cases: $200 1st down 2-5 Dunable override:$250 In Frame BB Shearer Pipes Chrome: $500 +8 Oval housing Top Dog chrome swing arm with flame design:$400 Torch works aluminum radiator, slight bend from crash but works fine and is nice: $150 Roll Design Steering Stem with LSR bar clamp: $ 300 Chrome Clutch case: $100 Hinson full basket 7 disc clutch straight cut gear and flat bearing: $600 MOD QUAD Flame design Chrome stator cover: $ 150 Chrome J-arms made by custom creations: $275 Billet Manifold for 35's: $75 Aluminum tie rods: $25 Lightened Stock Frame, Black no title: $400 22x11x8 Extreme buff's with 8 paddles: $450 Trimmed Blue plastics:$150 Custom covered seat with iron cross: $100 Billet Front hubs LSR no front brakes: $150 40mm axle carrier: $70 Revalved Rear OEM shock done by TCS Hillshooter shock: $300 Misc internals and externals (chain guides, tensioners..etc): PM (Right) Green One is a 4mil Supercub 485cc on Alky: Dyno'd 114HP Want to try and sell motor as a complete first: $5000obo Noss Machine Super Cub Cool Head with custom to the cylinder domes Nate McCoy Drag ported Cylinder *polished* 73 bore instead of 72 Neutral Down dunable 1-5 override Lock up clutch OEM stator Clean Cases match ported bored for Super Cub cylinder 39 PWK Alky Carbs, need new power jets, I can buy some and put them in whatever works: $450 Pods:$45 BB OOF Left side CPI's: $500 +8 ladder bar chromoly swing arm a little ruff: $200 Custom Creations drag chrome A-arms: $ 450 Aluminum tie rods: $25 White Knuckle Drag Axle: $ 450 Aluminum Radiator: $ 125 Chrome Stock Steering Stem: $100 Front Marvin Shaws 14": $250 Rear Marvin Shaw 13": $130 22x11x8 10 paddle Extreme Haulers Triple Buffs: $450 Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Mod Quad Polished Stator cover: $150 Polished Clutch Cover White knuckle: $150 Super cut down vinyl/fabric black checkerboard seat: $100 Lightened Stock frame metallic purple has title: $500 Misc internals and externals (chain guides, tensioners..etc):PM NOTHING INCLUDES SHIPPING. PM me your number and what you want a picture of or just PM for questions. Some of it may not be taken apart yet but we are working on it right now. Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 17, 2014 Author Report Share Posted May 17, 2014 Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 17, 2014 Author Report Share Posted May 17, 2014 Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 17, 2014 Author Report Share Posted May 17, 2014 Quote Link to comment Share on other sites More sharing options...
TwistedMethods Posted May 17, 2014 Report Share Posted May 17, 2014 Awsome bikes Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SUPR3M3 Posted May 17, 2014 Report Share Posted May 17, 2014 Interested in the chrome j arms. Txt @ 909-261-6058. Are they stock length or how long are they?? 1 Quote Link to comment Share on other sites More sharing options...
TwistedMethods Posted May 18, 2014 Report Share Posted May 18, 2014 And to the j arms have replaceable ball joints ? Also would like to know if they are stock length Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 18, 2014 Author Report Share Posted May 18, 2014 Yes replicable and stock length. And to the j arms have replaceable ball joints ? Also would like to know if they are stock lengthSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
mxturd Posted May 18, 2014 Report Share Posted May 18, 2014 Im intrested in one of the cut down seats, do you have any better pics of them Quote Link to comment Share on other sites More sharing options...
Ben Nettles Posted May 18, 2014 Report Share Posted May 18, 2014 Interested in billet intakes Sent from my SCH-I545 using Tapatalk Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 18, 2014 Author Report Share Posted May 18, 2014 Parting out these 3 Drag Bikes. Trust us not what we want to do but our kid is heavy into motocross and doing well. Time to not be selfish. Starting left to right: (Left) Primer Red one is a 10Mil Cheetah cub 465cc on Alky: Dyno'd 114 HP Want to try and sell motor as a complete first asking: $5000obo Billet 10mil crank Nate McCoy Drag ported Cheetah cub, Wosner pistons, Noss Machine cool head with custom domes Vforce 2 Reeds OEM stator Clean bored stock cases White Knuckle Billet manifold 1st down 2-5 Dunable override: Shearer BB OOF Left side pipes: $550 Packard Lectron Alky carbs 40's : $750 Pods: $45 Dyna Ignition: $275 Aluminum Gas tank 1.5gal: $ 150 +10chrome ladder bar swingarm: $350 JJ&A Drag Axle: $400 10in extended front stock and lightened frame, Stellar Chromoly J-Arms, and Custom Steering Stem, and radiator, aprox 60% chromoly,Powder Coat Black no title: $800 Sling Shot clutch: $275 Front Marvins 14.5": $250 Rear Marvins 14.5": $130 Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Rear Paddles 22x11x8 10paddles triple buff: $450 Cut Down Black vinyl seat: $100 Misc internals and externals (chain guides,plastic, tensioners..etc): PM (Center) Blue one is a 4mil Cheetah cub 421cc on gas: Dyno'd 105HP Parting this motor: 4mil Hot Rod Crank: $250 Nate McCoy Drag Ported Cheetah Cub *polished*: (pistons and domes) $1400 SOLD Pro Design Cool Head: $75 SOLD OEM Stator with timing plates: $150 Vforce 2 reeds: $150 Clean stock Cases: $200 1st down 2-5 Dunable override:$250 In Frame BB Shearer Pipes Chrome: $500 +8 Oval housing Top Dog chrome swing arm with flame design:$400 Torch works aluminum radiator, slight bend from crash but works fine and is nice: $150 Roll Design Steering Stem with LSR bar clamp: $ 300 Chrome Clutch case: $100 Hinson full basket 7 disc clutch straight cut gear and flat bearing: $600 MOD QUAD Flame design Chrome stator cover: $ 150 Chrome J-arms made by custom creations: $275 Billet Manifold for 35's: $75 Aluminum tie rods: $25 Lightened Stock Frame, Black no title: $400 22x11x8 Extreme buff's with 8 paddles: $450 Trimmed Blue plastics:$150 Custom covered seat with iron cross: $100 Billet Front hubs LSR no front brakes: $150 40mm axle carrier: $70 Revalved Rear OEM shock done by TCS Hillshooter shock: $300 Misc internals and externals (chain guides, tensioners..etc): PM (Right) Green One is a 4mil Supercub 485cc on Alky: Dyno'd 114HP Want to try and sell motor as a complete first: $5000obo Noss Machine Super Cub Cool Head with custom to the cylinder domes Nate McCoy Drag ported Cylinder *polished* 73 bore instead of 72 Neutral Down dunable 1-5 override Lock up clutch OEM stator Clean Cases match ported bored for Super Cub cylinder 39 PWK Alky Carbs, need new power jets, I can buy some and put them in whatever works: $450 Pods:$45 BB OOF Left side CPI's: $500 +8 ladder bar chromoly swing arm a little ruff: $200 Custom Creations drag chrome A-arms: $ 450 Aluminum tie rods: $25 JJ&A Drag Axle: $ 450 SOLD Aluminum Radiator: $ 125 Chrome Stock Steering Stem: $100 Front Marvin Shaws 14": $250 Rear Marvin Shaw 13": $130 22x11x8 10 paddle Extreme Haulers Triple Buffs: $450 Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275 Mod Quad Polished Stator cover: $150 Polished Clutch Cover White knuckle: $150 Super cut down vinyl/fabric black checkerboard seat: $100 Lightened Stock frame metallic purple has title: $500 Misc internals and externals (chain guides, tensioners..etc):PM NOTHING INCLUDES SHIPPING. PM me your number and what you want a picture of or just PM for questions. Some of it may not be taken apart yet but we are working on it right now. Quote Link to comment Share on other sites More sharing options...
Shee421alky Posted May 18, 2014 Report Share Posted May 18, 2014 u have pics of alum tank? 831-710-0432 Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 18, 2014 Author Report Share Posted May 18, 2014 SENT Quote Link to comment Share on other sites More sharing options...
Racerx812 Posted May 18, 2014 Report Share Posted May 18, 2014 Drag axle, carrier, and checker seat sold.. Quote Link to comment Share on other sites More sharing options...
DragBikeParting Posted May 18, 2014 Author Report Share Posted May 18, 2014 SOLD: Both JJ&A axles Checker seat Rear Brake set up Both rear marvins Aluminum Tank Chain, 15/41 sprockets, clutch cable Ill keep updating Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.