Jump to content

Turbo,Pipes,Reeds,Carbs,Lockup,Stator Cover


Recommended Posts

Cleaning out the garage and looking to get rid of some parts. PM me with any questions

Aerocharger 53 series turbo- $1100 shipped 

I bought it from Brian Stimbert from quality powdercoat with plans to build a turbo 350. Too many other builds on the table to start another project. Not much run time on the turbo.

 

Shearer DM pipes- $375 shipped

These were ran on my 14mm DM, few minor dings but nothing major, has an adapter plate so you can swap on silencers if you ride in the dunes, mounts have been re welded.

 

39mm Keihin carbs with powerjets- $300 shipped

one float on each carb was removed to help get more fuel in, .122" dump, setup for gravity feed alcohol, 1 carb has slight damage where the filter clamps on but was repaired and has never caused me any issues, left carb float bowl nut has been welded and filed down smooth so it doesn't interfere with clutch arm, bottom fitting for power jet line will be installed before shipped out.

 

cr 500 V-force reeds with 39mm intakes- $175 shipped

Reeds and intakes came off my DM and are both in decent condition

 

Direct Drive lockup clutch- $60 shipped

Good working condition

 

Chariot bearing support stator cover- $150 shipped

Decent working condition

 

 

http://i1113.photobucket.com/albums/k513/macdaddyracing/photo_zps560ad388.jpg

http://i1113.photobucket.com/albums/k513/macdaddyracing/photo6_zpse773bcf3.jpg

http://i1113.photobucket.com/albums/k513/macdaddyracing/photo1_zpsc7081aae.jpg

http://i1113.photobucket.com/albums/k513/macdaddyracing/photo2_zpse6f9d633.jpg

http://i1113.photobucket.com/albums/k513/macdaddyracing/photo3_zps0d3fa4e7.jpg

http://i1113.photobucket.com/albums/k513/macdaddyracing/photo4_zps45a1f29f.jpg

http://i1113.photobucket.com/albums/k513/macdaddyracing/photo5_zps525eb8c1.jpg

http://i1113.photobucket.com/albums/k513/macdaddyracing/photo7_zpsfeb5ce13.jpg

Edited by MacDaddy racing
  • Like 1
Link to comment
Share on other sites

When was the last time the turbo was serviced?

 

What spring is in the waste gate?

 

How many shims are on the spring?

 

Does the waste gate have any sort of bleed valve on it?

 

What is the SN?

 

Sent from my SCH-I545 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...