sprinklerman Posted May 7, 2014 Report Share Posted May 7, 2014 If it needs to be changed I will change it, theguy who ported it suggested puting a 4mil in it with it ported this way, I'm not a banshee guru yet but as far as the longer stroke I would assume that would just give more compression and the ported cylinders are just flowingbetter, he also mentioned that he decked the head .030 instead of .040 incase I did go with a different crank, I know many of people are decked to .040 with a longer stroke but I listen to what he tells me, I don't have the port measurements on me right now but I will post them. I'm already happy with the way it runs now. Smh.... Sent from a van down by the river 1 Quote Link to comment Share on other sites More sharing options...
984mmshee Posted May 7, 2014 Report Share Posted May 7, 2014 Is this guy for real? Yesterday he is goin together with the bike now he is putting a modded tranny in. Why not do that shit while it is apart already or do you just like takin shit apart and putting it together? If so but some legos. FFS !!!! Quote Link to comment Share on other sites More sharing options...
03DMshee Posted May 7, 2014 Report Share Posted May 7, 2014 If it needs to be changed I will change it, theguy who ported it suggested puting a 4mil in it with it ported this way, I'm not a banshee guru yet but as far as the longer stroke I would assume that would just give more compression and the ported cylinders are just flowingbetter, he also mentioned that he decked the head .030 instead of .040 incase I did go with a different crank, I know many of people are decked to .040 with a longer stroke but I listen to what he tells me, I don't have the port measurements on me right now but I will post them. I'm already happy with the way it runs now. Did you really just say that? Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted May 7, 2014 Report Share Posted May 7, 2014 lol Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted May 7, 2014 Report Share Posted May 7, 2014 If it needs to be changed I will change it, theguy who ported it suggested puting a 4mil in it with it ported this way, I'm not a banshee guru yet but as far as the longer stroke I would assume that would just give more compression and the ported cylinders are just flowingbetter, he also mentioned that he decked the head .030 instead of .040 incase I did go with a different crank, I know many of people are decked to .040 with a longer stroke but I listen to what he tells me, I don't have the port measurements on me right now but I will post them. I'm already happy with the way it runs now. Holly santa shit Quote Link to comment Share on other sites More sharing options...
sstaton1983 Posted May 7, 2014 Report Share Posted May 7, 2014 If it needs to be changed I will change it, theguy who ported it suggested puting a 4mil in it with it ported this way, I'm not a banshee guru yet but as far as the longer stroke I would assume that would just give more compression and the ported cylinders are just flowingbetter, he also mentioned that he decked the head .030 instead of .040 incase I did go with a different crank, I know many of people are decked to .040 with a longer stroke but I listen to what he tells me, I don't have the port measurements on me right now but I will post them. I'm already happy with the way it runs now. The guy that ported your cylinders is no banshee guru either. And you arn't even sure what the porting is for, and I bet the guy doing the porting probably didn't measure shit.. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted May 7, 2014 Report Share Posted May 7, 2014 If it needs to be changed I will change it, theguy who ported it suggested puting a 4mil in it with it ported this way, I'm not a banshee guru yet but as far as the longer stroke I would assume that would just give more compression and the ported cylinders are just flowingbetter, he also mentioned that he decked the head .030 instead of .040 incase I did go with a different crank, I know many of people are decked to .040 with a longer stroke but I listen to what he tells me, I don't have the port measurements on me right now but I will post them. I'm already happy with the way it runs now.But you refuse help from people that have had shitty trail bikes faster then what your trying to do. The guy doing your motor, or you. Maybe a deadly combo between the two of you, have no clue on what your doing. Accept the help offered to you! For the cost of a case of beer you can be leaps and bounds ahead of where you are in a matter of hours if you actually put your ego aside and listen to people that are smarter then you. 1 Quote Link to comment Share on other sites More sharing options...
clrkaw26 Posted May 7, 2014 Author Report Share Posted May 7, 2014 Read back a little, I'm doing everything that people have reccommended, and have been thankful those, everything else posted are just slams and movie trailers and wanting to fuck up my couch, that's not help Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted May 7, 2014 Report Share Posted May 7, 2014 Windy and sprinkles are both good guys an have a lot of knowledge as well as others you blew off. If one of them was in my area and said they'll come by, I'd take them up on it in a heart beat. Your upset because they made fun of you on the internet? Grow a pair man. Were all a bunch of guys that are still obsessed with 25 year old toys. Of course none of us really grew up. 1 Quote Link to comment Share on other sites More sharing options...
clrkaw26 Posted May 7, 2014 Author Report Share Posted May 7, 2014 I'm not even mad at windy, I thought it was a little immature, I would rather give my bike away than to have anything to do with sprinkles, I don't believe inthat attitude, he's the only one that got under my skin, 99% of the others joined in on there own and I have notreally even talked shit to. But seriouslydid acknowledge helpful posts Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted May 7, 2014 Report Share Posted May 7, 2014 What cracks me up us that I never said you were poor. I said " if a new crank constitutes millionaire money, you're in over your head". I said that because 450.00 is a drop in the bucket compared to what can be spent on these things. So if that pissed you off...oh well. Must have hit a little to close to home huh? And that wasn't even my intention. YOU assumed I was saying you were poor...All I mentioned was that you should be prepared to spend A LOT more than 450.00 on that motor ....If you want it done right. But whatever..you're a genuine idiot and there's no cure for that. Sent from a van down by the river Quote Link to comment Share on other sites More sharing options...
clrkaw26 Posted May 7, 2014 Author Report Share Posted May 7, 2014 Nope, that's what you ended up rephrasing it to to save face.and how many times arr you goinh to go to the hit close to home or hit nail on the head, its old. Quote Link to comment Share on other sites More sharing options...
clrkaw26 Posted May 7, 2014 Author Report Share Posted May 7, 2014 There is many examples to show proof to show just how retard that OP is. Really???? If your going to call someone a retard make sure your post does not sound like it was written by a 5yr old. Quote Link to comment Share on other sites More sharing options...
possum Posted May 7, 2014 Report Share Posted May 7, 2014 Holly santa shitsee above Quote Link to comment Share on other sites More sharing options...
clrkaw26 Posted May 7, 2014 Author Report Share Posted May 7, 2014 Look at all the followers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.