Jump to content

High idle after complete rebuild


Recommended Posts

280 main 30 pilot jet, Coolhead, Fmf exhaust, pod filters. I had a hard time getting fuel into the jugs after getting my cylinders bored and wiseco pistons installed. I opened the plugs and dumped fuel down the jugs. Started right away but will only idle if I have the choke out all the way. I know this means it's lean but with a 30 pilot? Air adjust screw is all the way in. Do I need a larger main? Sounds good when the choke is fully out. Even if it's half way it's idling pretty high. The carb slides are fully down and in the correct carb. Choke tube is connected between the carbs

 

Sent from my HTC One using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...