locogato11283 Posted April 23, 2015 Report Share Posted April 23, 2015 RU = DUMB Quote Link to comment Share on other sites More sharing options...
Dixie normus Posted April 23, 2015 Report Share Posted April 23, 2015 WORD!! Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted April 23, 2015 Report Share Posted April 23, 2015 ^^^ Bunch of buttholes. You don't know how much better I'm going to sleep knowing these cyls have RUs stamp of approval. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted April 23, 2015 Report Share Posted April 23, 2015 Who is RU, does anyone know his real name?Ken. O'connor. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted April 23, 2015 Report Share Posted April 23, 2015 Who is RU, does anyone know his real name? I've asked him repeatedly to give us a real name and he refuses. I'm guessing Windy. They're both dumb as fuck. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted April 24, 2015 Report Share Posted April 24, 2015 What was wrong with the review? Loco and RRL are just looking to share the hate. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted April 24, 2015 Report Share Posted April 24, 2015 I'll be honest, I didn't even read his post. I just think he's dumb as fuck. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted April 24, 2015 Report Share Posted April 24, 2015 I told my girl Jessica what to say. Quote Link to comment Share on other sites More sharing options...
registered user Posted April 25, 2015 Report Share Posted April 25, 2015 it was a honest review of what i saw with my own eyes. didnt say nothing negative that wasnt true. for $300 there isnt much to complain about. theres a couple things about them i like better than stockers but still theres a few things i would of done different. theyre a good platform to start with if a person wants to use stock type cylinders but as theyre sent out they are a bit rough around the edges but again for $300 its tough to complain. atleast they didnt do what athena did and jump right to 68mm, which gains you almost nothing but a heavier piston and empty your wallet $700 Quote Link to comment Share on other sites More sharing options...
registered user Posted April 25, 2015 Report Share Posted April 25, 2015 (edited) heres the reality of it. besides it being absolutely necesarry to chamfer the windows i would also recomend having a close look at everything. the sleeve windows werent cast symetric as you can see the right rear window is nearly 3.5mm narrower than the opposing side. for me this isnt any concearn as ill have my porting tools in there soon enough but for the people that try to run them out of the box, you might think twice. with the mismatch asymetric stuff ive seen so far they wouldnt run real well without some cleanup. i havent yet checked if the bore center line is true to where its supposed to be but if it checks out ok then the other issues are fairly minor Edited April 25, 2015 by registered user Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted April 25, 2015 Report Share Posted April 25, 2015 heres the reality of it. besides it being absolutely necesarry to chamfer the windows i would also recomend having a close look at everything. the sleeve windows werent cast symetric as you can see the right rear window is nearly 3.5mm narrower than the opposing side. for me this isnt any concearn as ill have my porting tools in there soon enough but for the people that try to run them out of the box, you might think twice. with the mismatch asymetric stuff ive seen so far they wouldnt run real well without some cleanup. i havent yet checked if the bore center line is true to where its supposed to be but if it checks out ok then the other issues are fairly minor Fuck it. When your right, your right. That port is noticeably smaller. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted April 25, 2015 Report Share Posted April 25, 2015 ^ yeah..... No bueno. Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 25, 2015 Report Share Posted April 25, 2015 it was a honest review of what i saw with my own eyes. didnt say nothing negative that wasnt true. for $300 there isnt much to complain about. theres a couple things about them i like better than stockers but still theres a few things i would of done different. theyre a good platform to start with if a person wants to use stock type cylinders but as theyre sent out they are a bit rough around the edges but again for $300 its tough to complain. atleast they didnt do what athena did and jump right to 68mm, which gains you almost nothing but a heavier piston and empty your wallet $700Good review R/U. I'm thinking it's the only hands on one that I've seen, or read. Sent from your mammy house Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted April 25, 2015 Report Share Posted April 25, 2015 Redline has a set. Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted April 25, 2015 Report Share Posted April 25, 2015 Redline has a set.I remember reading that, and you saying you had no idea what happened to them. Did I miss redlines input on them somwhere? Sent from your mammy house Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.