BANSHEE HP Posted March 13, 2015 Report Share Posted March 13, 2015 So they need chamfering but are drop in ready with no machine work? Quote Link to comment Share on other sites More sharing options...
Zillaguy Posted March 13, 2015 Report Share Posted March 13, 2015 Okay. My current cylinders are at 66mm and I'm just a stocker except for pipes and some vforce reeds . I just don't want to spend 428 for another bore on cylinders that are paper thin. So I'm tempted to get a set. But the old sayin is of it's too good to be true then it probably is .. So who knows . Wonder if the niche cylinders are boreable?$428 for a bore?! WTF?! Boy, did they see you coming a mile away! Boring of both cylinders is $100 ($50 ea. including chamfering) pistons are $150ish. Who ever is doing your machine work scammed you big time! Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted March 13, 2015 Report Share Posted March 13, 2015 400ish is a little more than I would charge but it's not far off. 100 to bore 200 for 66mm pistons 40 for gaskets 20 for wrist pin bearings Quote Link to comment Share on other sites More sharing options...
gusto Posted March 13, 2015 Report Share Posted March 13, 2015 $490 CDN for everything is almost too good to be true. And they added a little more meat for porting. Might be a little extra potential for hp in these cylinders. Regardless, I think they are the best deal in Banshee land Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted March 13, 2015 Report Share Posted March 13, 2015 They are nice cylinders. I haven't officially announced it yet, but Niche is a BansheeHQ sponsor. They were wanting to get their website up and running before posting. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted March 13, 2015 Report Share Posted March 13, 2015 And they added a little more meat for porting. Might be a little extra potential for hp in these cylinders. Where did you hear that? Quote Link to comment Share on other sites More sharing options...
gusto Posted March 13, 2015 Report Share Posted March 13, 2015 I either read it in the add, website, or on this forum. Quote Link to comment Share on other sites More sharing options...
gusto Posted March 13, 2015 Report Share Posted March 13, 2015 Yep it's on the video in the add I posted up. Shit, you Yankees are coming in 25% under $490! 1 Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted March 14, 2015 Report Share Posted March 14, 2015 I either read it in the add, website, or on this forum.Got it. I just watched the video Quote Link to comment Share on other sites More sharing options...
registered user Posted March 14, 2015 Report Share Posted March 14, 2015 not really any updates but they are selling http://www.ebay.com/itm/NEW-YAMAHA-BANSHEE-350-STANDARD-STD-BORE-CYLINDER-PISTON-GASKET-KIT-1987-2006-/381117616887?fits=Model%3ABanshee+350 if these are just stock cylinder copies, which they appear to be, i cant think of a bigger waste of time and effort. stock cylinder copy=epic fail Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted March 14, 2015 Report Share Posted March 14, 2015 if these are just stock cylinder copies, which they appear to be, i cant think of a bigger waste of time and effort. stock cylinder copy=epic fail You really are dumb as fuck. The price tag on these makes them affordable for nearly anyone. Not everyone wants/needs/can afford aftermarket or ported cylinders. I know that keeping an open mind is hard for you, but even CP has acknowledged that they're a great replacement for OEM cylinders at a great price. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted March 14, 2015 Report Share Posted March 14, 2015 Stock cylinders for life! Quote Link to comment Share on other sites More sharing options...
registered user Posted March 14, 2015 Report Share Posted March 14, 2015 You really are dumb as fuck. The price tag on these makes them affordable for nearly anyone. Not everyone wants/needs/can afford aftermarket or ported cylinders. I know that keeping an open mind is hard for you, but even CP has acknowledged that they're a great replacement for OEM cylinders at a great price. hold on a minute cowboy. you have the meens to cast a new cylinder and the best you can do is a copy of the stocker, then consider yourself #1 candidate for idiot of the century award. these cylinders are so fukin ancient its pathetic and copying them should be a crime. theres alot of ways they could have improved them and still been more than affordable to any homeless redneck. i know your sticking your neck out because theyre a sponsor but this is a sad situation of something that could of been good but isnt. 1 Quote Link to comment Share on other sites More sharing options...
Dixie normus Posted March 14, 2015 Report Share Posted March 14, 2015 hold on a minute cowboy. you have the meens to cast a new cylinder and the best you can do is a copy of the stocker, then consider yourself #1 candidate for idiot of the century award. these cylinders are so fukin ancient its pathetic and copying them should be a crime. theres alot of ways they could have improved them and still been more than affordable to any homeless redneck. i know your sticking your neck out because theyre a sponsor but this is a sad situation of something that could of been good but isnt. You clueless fuck!! Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted March 14, 2015 Report Share Posted March 14, 2015 hold on a minute cowboy. you have the meens to cast a new cylinder and the best you can do is a copy of the stocker, then consider yourself #1 candidate for idiot of the century award. these cylinders are so fukin ancient its pathetic and copying them should be a crime. theres alot of ways they could have improved them and still been more than affordable to any homeless redneck. i know your sticking your neck out because theyre a sponsor but this is a sad situation of something that could of been good but isnt. Wow, again you show us all that you're even dumber than previously thought. Tons of people out there still run OEM cylinders that aren't ported. Tons of people don't need anything more than OEM or replacements. Why would Niche attempt to improve on OEM cylinders with CP putting out Servals and Cubs? They wouldn't because they're smart, which is a lot more than I can say for you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.