nfldbanshee Posted April 10, 2014 Report Share Posted April 10, 2014 Hey everyone picked up an 01 banshee not to long ago and I'm about to replace the front rotors and pads and I was just wondering the easiest way to get the hub and rotor off to get this done. Quote Link to comment Share on other sites More sharing options...
nfldbanshee Posted April 10, 2014 Author Report Share Posted April 10, 2014 So the hub should slide off with a little persuasion ? Quote Link to comment Share on other sites More sharing options...
special06shee Posted April 10, 2014 Report Share Posted April 10, 2014 Once ya take the spindle nut off it should slide right off with little effort. Quote Link to comment Share on other sites More sharing options...
Starwriter Posted April 10, 2014 Report Share Posted April 10, 2014 If you're going to unbolt the rotors from the hubs, heat the bolts a little bit to soften the loctite, so you don't round out the allen heads. 1 Quote Link to comment Share on other sites More sharing options...
special06shee Posted April 10, 2014 Report Share Posted April 10, 2014 X2^^ Quote Link to comment Share on other sites More sharing options...
nfldbanshee Posted April 11, 2014 Author Report Share Posted April 11, 2014 sounds good I just put new handle bars , grips , levers ,billet throttle and brake master cylinder cover , gas cap , chariot chain roller and my alba bumper and nerf bars showed up today with a few more things on the way so she's slowly coming together . 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.