d-shaw-07 Posted April 8, 2014 Report Share Posted April 8, 2014 Hi guys looking for a decent cube engine that preferably runs pump fuel and preferably not 2-5 overinde wanna be able to ride not just in straight line it will need to be sent to me in Australia been looking around but got the shits with everything so I got up to 3500 plus postage to spend so if anyone has anything cool let me no Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted April 8, 2014 Report Share Posted April 8, 2014 hey man, hit up a sponsor on here, see what they can do for ya. send them a PM. ive used wildcard, hjr and f.a.s.t with good results. redline has been pumping out good work too. sponsors. http://www.bansheehq.com/bansheehq-sponsors/ Quote Link to comment Share on other sites More sharing options...
d-shaw-07 Posted April 8, 2014 Author Report Share Posted April 8, 2014 Mate tried calling him this morning and tonight I see he says he got a deposit unless im reading things wrong otherwise I would, I could be wrong and have been before Quote Link to comment Share on other sites More sharing options...
d-shaw-07 Posted April 8, 2014 Author Report Share Posted April 8, 2014 hey man, hit up a sponsor on here, see what they can do for ya. send them a PM. ive used wildcard, hjr and f.a.s.t with good results. redline has been pumping out good work too. sponsors. http://www.bansheehq.com/bansheehq-sponsors/ Thanks for the posative feedback :-) Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted April 8, 2014 Report Share Posted April 8, 2014 you dont really want a DM for a trail motor anyway, why dont you just buy everything from the crank up and build something up from your motor like a 4mm ported serval one shop of your choice on here can sell you everything you need in one hit Quote Link to comment Share on other sites More sharing options...
d-shaw-07 Posted April 8, 2014 Author Report Share Posted April 8, 2014 Mate by the time I import the parts and the stuff ups I'm likely to make I'm just better off buying complete I got a 4mm 410 with trinity porting but wanting more and oh yer busted a rod from undersized pistons when a mate did a overhaul for me so lesson learned but I want to do the dirt drags they have locally here plus there is a beach race as well laps around a couple of barrels so I'm wanting part drag to be a lot more competitive with that I was thinking big cube on pump with no override would be good but like my status says noob so any advice would be awesome guys Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted April 8, 2014 Report Share Posted April 8, 2014 well best advice is to stay the fuck away from trinity, there was another aussie on here last year that mentioned a beach race with a 10cub from trinity, it was a complete bomb Quote Link to comment Share on other sites More sharing options...
d-shaw-07 Posted April 8, 2014 Author Report Share Posted April 8, 2014 So in a nutshell I think I'm after something on pump with big hp but a tranny I can still down shift is what I'm thinking and also thinking bout a two or four inch rear swing arm extension allready got stainess a arms with 2 inch widening up front Quote Link to comment Share on other sites More sharing options...
d-shaw-07 Posted April 8, 2014 Author Report Share Posted April 8, 2014 well best advice is to stay the fuck away from trinity, there was another aussie on here last year that mentioned a beach race with a 10cub from trinity, it was a complete bomb Defiantly be keeping that in mind Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted April 8, 2014 Report Share Posted April 8, 2014 ummm..where did you buy these stainless a-arms from? Quote Link to comment Share on other sites More sharing options...
d-shaw-07 Posted April 8, 2014 Author Report Share Posted April 8, 2014 Came on one of the first banshees I owned they seem bullet proof but makes the frame ya weakest link which would probably cost ya more in the long run haha I could try upload a photo if u wanna c them Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted April 8, 2014 Report Share Posted April 8, 2014 it dont really matter if they are strong, but a couple of the fellas on here bought some stainless a-arm off ebay recently and they were pathetic chinese shit, the shock mounts were a joke Quote Link to comment Share on other sites More sharing options...
d-shaw-07 Posted April 8, 2014 Author Report Share Posted April 8, 2014 (edited) it dont really matter if they are strong, but a couple of the fellas on here bought some stainless a-arm off ebay recently and they were pathetic chinese shit, the shock mounts were a joke Mate iv had these for around seven years and are very good quality from what iv seen not that I'm an expert but have stood the test of time for me Edited April 8, 2014 by d-shaw-07 Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted April 8, 2014 Report Share Posted April 8, 2014 if your willing to swing the spanners yourself, wich i must admit seems a little bit daunting to begin with, but there are plenty of peeps on here willing to help if your willing to learn you could build yourself a killer motor for 3 and a half k... waiting for a fresh big cube motor from a reputable seller that could be bothered sending it to oz could take a while 1 Quote Link to comment Share on other sites More sharing options...
d-shaw-07 Posted April 8, 2014 Author Report Share Posted April 8, 2014 Yer I own a panel shop and my neighbour there is a fustedious bike mechanic so swinging the spanner is ok and two strokes are a simple setup haha and yer would be a hassle to send to me that is true Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.