swhitey917 Posted April 9, 2014 Report Posted April 9, 2014 i always ran the 50/50 with no problems. I run engine Ice now but that's just cause I had a buddy that had a few bottles of it and then sold his quad so he gave it to me. Either one works fine. Quote
pp13bnos Posted April 10, 2014 Report Posted April 10, 2014 For what its worth, I'm going to run Evans in my bike when the new motor goes in. I've had great luck running it in my single turbo Rx-7. 1 Quote
dirtydownunder Posted April 10, 2014 Report Posted April 10, 2014 that waterless coolant stuff ? i wouldnt waste your money, same as in ya RX. both of those machines will run fine on normal coolant.. Quote
pp13bnos Posted April 10, 2014 Report Posted April 10, 2014 Nucleate boiling and rotarys don't go well, espcially around the trailing spark plug hole. Atleast boosted ones. A couple extra bucks on coolant is worth the extra protection imop. On Banshees, I don't know if nucleate boling is a major issue. But what I do like is the idea of a low pressure cooling system, and the bike warming up faster. My.02 for what its worth. Quote
dirtydownunder Posted April 10, 2014 Report Posted April 10, 2014 i dunno, i been around enough 500-800hp 13/20b's to know they dont need special coolant if its working for you, keep using it i guess. banshee is like 13/15 psi thats average as coolant pressure goes., and more coolant pressure raises the boiling temperature. pressure doesnt matter when youre using that evans coolant anyway, Quote
TwistedMethods Posted April 11, 2014 Report Posted April 11, 2014 Can I just not put my overflow bottle back on when I put my quad back together ? What do I have to do to get rid of it ? Sent from my iPhone using Tapatalk Quote
sheerider11 Posted April 11, 2014 Report Posted April 11, 2014 Can I just not put my overflow bottle back on when I put my quad back together ? What do I have to do to get rid of it ? Sent from my iPhone using Tapatalk Throw it in the trash. Run hose straight down. I ran mine to where pipe hangers are, through the frame and it'll piss on the pipe if it were to over heat Quote
TwistedMethods Posted April 11, 2014 Report Posted April 11, 2014 Awesome thanks for the help Sent from my iPhone using Tapatalk Quote
bansheeryder21 Posted April 17, 2014 Report Posted April 17, 2014 Good inputs. I've used everything. Now I just use distilled water. Keep it clean. Quote
greasergroff Posted April 18, 2014 Report Posted April 18, 2014 factory toyota pink or factory vw purple/pink....do some reseach there the best especially with aluminum i run that in all the toys.lol Quote
ROAD RUNNER24 Posted April 18, 2014 Report Posted April 18, 2014 Engine Ice is a joke. Shit sucks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.