fummins350 Posted February 11, 2014 Report Share Posted February 11, 2014 So my buddy had his motor rebuilt on his banshee and now it wont run right. The reason for havin it rebuilt was had an aftermarket cdi box on it which went bad and made his motor run Backwards and it blew up. So this is the list of stuff he has done to it.... 4 mill stroker with the long rods, bored .40 over, vforce 4 reeds, cool head with 22cc domes, k&n airfilter, boost bottle, dmc pipes, it was a brand new fly wheel and stator but there not anything crazy aftermarket like, they are the stock carbs with the TORS removed. Right now we havent touched the carbs it will start up but when you give it gas it bogs down and shuts off. And it kinda sounds like its not firing right either. I dont know what it could be if the carbs need adjusted and need to know what jets to run in them and if the timing could be off or what to do with it... If someone could please help me that would be great. Thank you!!! Quote Link to comment Share on other sites More sharing options...
Kendro Posted February 11, 2014 Report Share Posted February 11, 2014 Who rebuilt it sounds like the one I did when i got in a hurry and put pistons in backwards. Quote Link to comment Share on other sites More sharing options...
Kendro Posted February 11, 2014 Report Share Posted February 11, 2014 30 pilot 300 main should be close on jets. Ditch the boost bottle. Do a leakdown. I see your a noob here.... read read and read some more lots of good info here just have to dig a little to find it. Quote Link to comment Share on other sites More sharing options...
uman1030 Posted February 11, 2014 Report Share Posted February 11, 2014 duplicate post... lol one thread will work for future reference sir. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.