Abe Posted February 2, 2014 Report Share Posted February 2, 2014 Both bores have freeze cracks that are pushed slightly forward and slightly up. Are these repairable without reliability issues and cost worthy ? Was not ran in this condition. Quote Link to comment Share on other sites More sharing options...
Finch Posted February 2, 2014 Report Share Posted February 2, 2014 im sure millennium could prolly fix em up depending how deep the cracks are. not gonna be to cheap tho but better then throwing them away IMO Quote Link to comment Share on other sites More sharing options...
Abe Posted February 2, 2014 Author Report Share Posted February 2, 2014 Cracks go through into the water jackets Quote Link to comment Share on other sites More sharing options...
Abe Posted February 2, 2014 Author Report Share Posted February 2, 2014 These are ported cyls so they have some money invested just don't want any later issues if to drop more coin. Any price estimates would be nice too Quote Link to comment Share on other sites More sharing options...
Redline Racing Posted February 2, 2014 Report Share Posted February 2, 2014 I had millinium repair one like that has been 3 years. Send it in and tell them to give you estimate on it. If it's not repairable they will tell you. Quote Link to comment Share on other sites More sharing options...
Abe Posted February 2, 2014 Author Report Share Posted February 2, 2014 Just what I needed cam , a little hope lol Quote Link to comment Share on other sites More sharing options...
Pastrykiller Posted February 2, 2014 Report Share Posted February 2, 2014 Those will have to be welded, decked and replated. All three items carry a price tag and will be pretty costly. Quote Link to comment Share on other sites More sharing options...
Pastrykiller Posted February 2, 2014 Report Share Posted February 2, 2014 For reference http://www.mt-llc.com/pricing.php Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted February 2, 2014 Report Share Posted February 2, 2014 How did this happen? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted February 2, 2014 Report Share Posted February 2, 2014 Millennium! They did my brothers KX cylinder and two other companies said no way it was doable. They truly are surgeons over there. Quote Link to comment Share on other sites More sharing options...
registered user Posted February 3, 2014 Report Share Posted February 3, 2014 shit them cracks aint nothin. i got weld all over in mine. bottom of the port, both aux dividers and a pressure relief hole above the port Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted February 3, 2014 Report Share Posted February 3, 2014 Just not enuff antifreeze? Looks nice and green. But u can never tell Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.