Starwriter Posted February 1, 2014 Report Share Posted February 1, 2014 K&N has a chart on their website that lists part numbers for all the different filters with specs. Generally the 10 degree filters work best. You can rotate them both to the right side. 1 Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted February 2, 2014 Report Share Posted February 2, 2014 I ran those filters a couple yrs back. Ran them 2-3 times then they got thrown into the bottom of my JUNK parts bin. A good bit of coal dirt was getting suck past/through the filters. Yes they were oiled properly, and yes i had outer wears. I was at ECA and Dave was really pushing me towards the blue foam ones they sell. Have you tried those? Quote Link to comment Share on other sites More sharing options...
special06shee Posted February 2, 2014 Report Share Posted February 2, 2014 I was at ECA and Dave was really pushing me towards the blue foam ones they sell. Have you tried those? me personally no. I know mike(lms1977) ran them for a while without any problems. I run genuine stage2 uni filters with outtwears Quote Link to comment Share on other sites More sharing options...
2strokeshees Posted February 2, 2014 Report Share Posted February 2, 2014 True K&N or foam filter. I had a set of the knock offs on my 4 mill and wont do it again, sand was getting through them so I went to Yamaha dealer and bought K&N and no problems. Like finch said you can go broke saving money, some times you need to spend a little extra. Quote Link to comment Share on other sites More sharing options...
rjdgriff Posted February 3, 2014 Report Share Posted February 3, 2014 My +6 kn fit great with 35pwks, og rocket pipes, upp intakes Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted February 3, 2014 Report Share Posted February 3, 2014 This was a pic of my old 4 mil with 6" pods with shearer sb if 35pwk Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
do-work-son Posted February 3, 2014 Report Share Posted February 3, 2014 HJR sells the knocks off .. I have a pair of his six in angled on one of my bikes.. i run the knock offs on my 421 cub. hjr told me to switch to k&n but i never did, will be putting in k&n's this year. someone told me once some knock offs are 4 ply and some are 8 ply but i have no idea if there is any truth to that. Quote Link to comment Share on other sites More sharing options...
hughmyron Posted February 5, 2014 Author Report Share Posted February 5, 2014 (edited) I paid about 3x as much for the filters, these filters can be found right here for like 5 bux or 8 bux each depending on the size. Part number for them is AFR177, if you want to try them out save your money and order some where else. Edited February 5, 2014 by hughmyron Quote Link to comment Share on other sites More sharing options...
sycoticbanshee00 Posted April 23, 2014 Report Share Posted April 23, 2014 I have those also. Have you ever had any problems? HJR sells the knocks off .. I have a pair of his six in angled on one of my bikes.. Quote Link to comment Share on other sites More sharing options...
Tyler James Inc Posted May 14, 2014 Report Share Posted May 14, 2014 Here's mine- Sent from a porta potty. 2 Quote Link to comment Share on other sites More sharing options...
TwistedMethods Posted May 14, 2014 Report Share Posted May 14, 2014 That motor is nice ^^ Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
hughmyron Posted June 5, 2014 Author Report Share Posted June 5, 2014 (edited) Just an update. Found the filter by part number they are like 25 for the pair shipped on ebay. Ran them for months on my old trail bike with not one issue at all. Edited June 5, 2014 by hughmyron Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.