vulvafan537240 Posted May 1, 2015 Report Posted May 1, 2015 Make sure the threads on the barrel are concentric to the bore and that the shoulder is straight. There aren't enough threads there to have it rethreaded. Quote
Lowflyin Posted May 1, 2015 Report Posted May 1, 2015 (edited) Make sure the threads on the barrel are concentric to the bore and that the shoulder is straight. There aren't enough threads there to have it rethreaded.It was looked over thoroughly before the transfer, we all know how some CAI aks are.. There is a muzzle brake by cnc warrior that will accept a silencer so that is likely the route I'll go, the barrel is already threaded 14x1LH , it just has the thread protector spot welded on. Sent from my LG-D850 Edited May 1, 2015 by Lowflyin Quote
vulvafan537240 Posted May 1, 2015 Report Posted May 1, 2015 I would check it with a dial indicator referencing the bore. A baffle strike is the last thing you want. There's very little wiggle room from a 30 cal can with 762. Quote
Lowflyin Posted May 1, 2015 Report Posted May 1, 2015 Ordered up some incendiary tracers yesterday as well, can't wait to play with them.. Sent from my LG-D850 Quote
Lowflyin Posted May 1, 2015 Report Posted May 1, 2015 I would check it with a dial indicator referencing the bore. A baffle strike is the last thing you want. There's very little wiggle room from a 30 cal can with 762.I'm aware, the silencer job will be done by a Smith, I don't feel comfortable doing it... From what I've read a 300bo can is my best bet Sent from my LG-D850 Quote
Lowflyin Posted May 1, 2015 Report Posted May 1, 2015 Which can are you looking at?I have it bookmarked on my laptop , can't remember off the top of my head..I'll post a link when I can Sent from my LG-D850 Quote
Lowflyin Posted May 1, 2015 Report Posted May 1, 2015 This was the original one I was looking at, I can't find the one I was thinking of though. http://yhm.net/stainless-30-cal-q-d-phantom-m3.html Sent from my LG-D850 Quote
threequarterthrottle Posted May 27, 2015 Report Posted May 27, 2015 Agreed. NO ONE needs an AR15, no one. Because everyone should own two? Quote
Lowflyin Posted May 27, 2015 Report Posted May 27, 2015 Hell yea. Recently ordered a psa upper and Anderson lower for an ar build. After that I want to build a mac11 but that may change. Sent from my LG-D850 Quote
Deadbeat Posted May 27, 2015 Report Posted May 27, 2015 i could throw half a brick at ya head and take all your shit Quote
threequarterthrottle Posted May 27, 2015 Report Posted May 27, 2015 I built a wyndham upper, Anderson lower this spring. I can't say anything bad about the Anderson. CMMG internals, the trigger is awesome. Quote
threequarterthrottle Posted May 27, 2015 Report Posted May 27, 2015 The other one is a Bushmaster, it doesn't have that shitty red dot on it anymore Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.