Ridiculous Fabrications Posted January 10, 2014 Report Share Posted January 10, 2014 I hope I put this in the rite section. Anyway, I'm shortening some tie rods for a buddy for mine. They are the stock tie rods. I might just make new ones for him that will use the stock tie rod ends Anyone no offhand what size thread and pitch on a tap I would need? LH thread and pitch same as RH thread and pitch? Thanks guys Chris Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted January 10, 2014 Report Share Posted January 10, 2014 10mm x 1.25, same left and right. I just shorten the right side on mine, so i didn't have to find a left handed tap Quote Link to comment Share on other sites More sharing options...
Ridiculous Fabrications Posted January 10, 2014 Author Report Share Posted January 10, 2014 Awesome thank you. I figured if I were to make a new set I would need both so I'll grab em tomarrow. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted January 10, 2014 Report Share Posted January 10, 2014 You're welcome, also, uses a "S" drill, or an 11/32 it's only .00425" smaller. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.