Young Guns Racing Posted January 9, 2014 Report Share Posted January 9, 2014 I am looking for a set of stock cylinders with either no port work or just a simple clean up job done to them. I am looking for an affordable set, I dont care if they need to be bored, cheapest set possible without having to re sleeve them is what i am looking for. I plan on taking this set of cylinders in to port with one of our in house templates and run it on a friends stock stroke stock cylinder banshee to get some dyno numbers established for our port work. Any help would be great! Pm me with what you have. Thanks. Quote Link to comment Share on other sites More sharing options...
thomas h. Posted January 10, 2014 Report Share Posted January 10, 2014 I've got Some pm me back Quote Link to comment Share on other sites More sharing options...
Young Guns Racing Posted January 10, 2014 Author Report Share Posted January 10, 2014 Interested in one set, looking for another as well so LMK what ya got! Quote Link to comment Share on other sites More sharing options...
shee Posted January 13, 2014 Report Share Posted January 13, 2014 Pm sent Quote Link to comment Share on other sites More sharing options...
JOSE_FBR7777 Posted January 13, 2014 Report Share Posted January 13, 2014 <p>I got some stock cylinders... Intake port was ported a lil..the transfer port is good and so is the exhaust...may need a lil honeing</p> Quote Link to comment Share on other sites More sharing options...
Young Guns Racing Posted January 13, 2014 Author Report Share Posted January 13, 2014 Got a few sets. Keep making offers, Im always looking for what may be a good set. Thanks to all who have answered this request! Quote Link to comment Share on other sites More sharing options...
junkyarddog Posted January 17, 2014 Report Share Posted January 17, 2014 Are you going to sell theses templates? Quote Link to comment Share on other sites More sharing options...
Young Guns Racing Posted January 17, 2014 Author Report Share Posted January 17, 2014 Are you going to sell theses templates? No, they are going to be a basis for our in house porting. We just have a few that we've gone through with trashed cylinders, got our durations and angles where we want them and now we are moving to the next step - testing them! Quote Link to comment Share on other sites More sharing options...
Young Guns Racing Posted January 21, 2014 Author Report Share Posted January 21, 2014 Thanks to all who have stopped by ans answered the call. We have enough cylinder sets for now! Thanks again! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.