Jump to content

winter jetting


Recommended Posts

hey guys

i have resently upped my jets and am having issues with the bike not starting ive checked all the normal stuff, cleaned the carbs, checked floats and hieght, cleaned filter, checked for spark and comprestion, checked for fuel flow, and nothing has changed. my original setup was 270 mains with 30 pilots and stock fuel mix screws postion at sea level at 60-85 degrees. i stepped up to 300 mains for winter as a starter so i could do the normal running check "run full open and pull clutch in and shut bike down and coast to a stop and check the plugs" but the bike wont start so i can even start the jetting prossess. ad help would be good thanks guys

Link to comment
Share on other sites

I'm still new to banshees but i forgot to put the crossover tube between the carbs and that killed mine till i found it. Also and check to see if you mixed up the carb bowls that could cause some problems. That is all if you have stock carbs.

What he said! also does your bike have tors still or has it been disconnected? Have you checked if your getting spark?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...