flynbrian1216 Posted November 8, 2003 Report Share Posted November 8, 2003 can any help me with the list of parts needed for a blaster front brake swap from a banshee any info would be grateful thx . Quote Link to comment Share on other sites More sharing options...
SCOTT PRESSLEY Posted November 8, 2003 Report Share Posted November 8, 2003 Take the complete front brake system from a banshee,then you will need to get spindels from banshee including hub and rotor for both sides.The ball joints are the same on blaster and the shee.You need to change spindel to give youself aplace to bolt caliper to. the lug spacing is the same on front rims,so you can run blaster rims on shee hubs.Also the tie rods are the same.Just take off and put on.When installing you will figure out where all the brake lines will need to go.Lot better brakes.Or just replace the blaster with a SHEE.THE SWAP WILL WORK EITHER WAY Quote Link to comment Share on other sites More sharing options...
flynbrian1216 Posted November 10, 2003 Author Report Share Posted November 10, 2003 thx for the help im in the process of getting the parts now thx Quote Link to comment Share on other sites More sharing options...
SCOTT PRESSLEY Posted November 11, 2003 Report Share Posted November 11, 2003 Look here or e-bay,I seen alot of the stuff you will need there.Good luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.