bignasty1 Posted November 7, 2003 Report Share Posted November 7, 2003 okay well title says it all here are my mods (current jets) 370 mains, 30 pilots dynojet needles 4th clip and air fuel screws turned out 2 turns. elevation 850 ft above sea level temps mid 40-high 50's and it starts first or second kick so its prolly the right size jet and just i forgot sumthin and am a dumb ass bored 40. stock carbs with the tors removed and idle kit installed.(srews all the way in) k&n duals with outer wears rocket inframe drag pipes boysen reeds stock cages lightly polished exhuast ports +2 timing noss machine cool head wih 20 cc domes 155 lbs of comp each as of tonight on warm cylinders. ohh and i put a fuel filter on it i have read of ppl on here putting them on but i dont know if they have had any problems cuz of them. Quote Link to comment Share on other sites More sharing options...
fixitrod Posted November 7, 2003 Report Share Posted November 7, 2003 If you just put the tors removal on it, then you may not have filed the carbs enough. I had to file a lot off before they would idle right. Quote Link to comment Share on other sites More sharing options...
bignasty1 Posted November 7, 2003 Author Report Share Posted November 7, 2003 i didnt even think about that it could be a possibility. i'll check into it. thanks. Quote Link to comment Share on other sites More sharing options...
Banchetta Posted November 8, 2003 Report Share Posted November 8, 2003 Damn I love that dumb assness!!! Keep flaunting baby, keep flaunting!!! Quote Link to comment Share on other sites More sharing options...
wesw Posted November 9, 2003 Report Share Posted November 9, 2003 the instructions claim file it smooth yeah right you need to file about 1-16 to 1-8 inch so it will work. to make sure this is the problem remove the nuts adn adjust the screw bet it will run then. later Quote Link to comment Share on other sites More sharing options...
SyNtAxx Posted November 10, 2003 Report Share Posted November 10, 2003 Hey, Did you install the carb slides in the proper direction ? Just a thought... NIck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.