screamingcub Posted November 3, 2013 Report Share Posted November 3, 2013 I'm curious as to how big of motors some guys are riding, I know drag guys are huge cc & multi cylinder etc. I'm talking about huge twin cylinders for general riding, how big of motors are guys finding reliable. I know some ones thinking cost etc, billet cases and all the $ associated with these kinds of setups. I'm fine with the cost to build & operate something huge x large. Just so long as its reliable, Rideable is up to the individual. Quote Link to comment Share on other sites More sharing options...
joey83 Posted November 3, 2013 Report Share Posted November 3, 2013 Usually dont find that. 421serval for all around trail riding. 1 Quote Link to comment Share on other sites More sharing options...
dozer Posted November 3, 2013 Report Share Posted November 3, 2013 520cc 10mm supercub is the biggest ive actually seen being ridden in the dunes. he rode it all over the dunes. it wasn't a "drag" bike more of a extreme duner type build, had a lock up but not a override, extended a arms, +6 swing arm nice shocks etc. I know its not huge but it isn't a small motor either. I don't know about reliability or build cost. Quote Link to comment Share on other sites More sharing options...
ban565 Posted November 3, 2013 Report Share Posted November 3, 2013 I dune ride a 565cc and a 542cc. They're are stock frames with 8" extended swingers and on race full. Quote Link to comment Share on other sites More sharing options...
Nightmare Posted November 3, 2013 Report Share Posted November 3, 2013 I dune ride a 565cc and a 542cc. They're are stock frames with 8" extended swingers and on race full. Hell yeah, nothing wrong with that. Sent from my SGH-T679 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted November 3, 2013 Report Share Posted November 3, 2013 Two years ago I was asking around the same thing and thought there was no way anything with over 4mm stroke would live. However since then, I have seen tons of 10 mil motors that get ridden hard in the dunes and coal hills. Even a few nuts riding big 10 mil motors in the trails. Louie at twister has a ton of 64mm stroke X 75mm bore motors in the north west and most of them are duners/trail bikes. That's pretty friggin big. Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted November 3, 2013 Report Share Posted November 3, 2013 getting a 521 serval built. It's going to be for pump gas so no high compression stress on the bottom end. I dont see why it wouldnt live Quote Link to comment Share on other sites More sharing options...
special06shee Posted November 3, 2013 Report Share Posted November 3, 2013 Im running a 10cub(465). That motor was in my hill climb bike. Didnt really have that much time on the motor before i decided to start building a drag chassis but anyway that motor never gave me any troubles for the time i had it on the hills. LMS1977 was running a 10serval 465. He beat the piss out of that motor on our hills for almost 3yrs with zero problems. Pabansheematt on here is running a 492 cheetah since like 2006. He has had some troubles with that but reconfigured the domes and it seems to be trouble free as of late. Hell, bluebanshee98 on here trail rides his dm611. Lol! As long as the motor is happy, and you can keep it cool. Your good to go Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted November 3, 2013 Report Share Posted November 3, 2013 Was there a problem with 10mil and larger bikes last years ago? Was it a quality issue on the cranks or what? I do remember 4mil being big for a trail bike about 5 years ago. No one did a 10mil unless drag racing a certain glass around my area. Quote Link to comment Share on other sites More sharing options...
Zillaguy Posted November 3, 2013 Report Share Posted November 3, 2013 My plan for the winter is to build a 4mill 75mm bore Twister for all around riding... Keep the compression low, and the port times conservative, and it should stay together for a long time... This build should put me around 512cc total. Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted November 3, 2013 Report Share Posted November 3, 2013 Im running a 10cub(465). That motor was in my hill climb bike. Didnt really have that much time on the motor before i decided to start building a drag chassis but anyway that motor never gave me any troubles for the time i had it on the hills. LMS1977 was running a 10serval 465. He beat the piss out of that motor on our hills for almost 3yrs with zero problems. Pabansheematt on here is running a 492 cheetah since like 2006. He has had some troubles with that but reconfigured the domes and it seems to be trouble free as of late. Hell, bluebanshee98 on here trail rides his dm611. Lol! As long as the motor is happy, and you can keep it cool. Your good to go^^^ truth Quote Link to comment Share on other sites More sharing options...
ban565 Posted November 4, 2013 Report Share Posted November 4, 2013 A buddy has a 512 on race fuel since 2010 with no problems. Great motor Quote Link to comment Share on other sites More sharing options...
robert0762 Posted November 4, 2013 Report Share Posted November 4, 2013 I just got done a ten mill super serval for play riding. Havent had much time to ride yet but its awesome when I do. Sent from my SCH-I535 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted November 4, 2013 Report Share Posted November 4, 2013 this season i ran a 10mm serval on race gas and let me tell ya i wouldnt run anything smaller it is fucking awesome in the trails and hillclimbing pretty much same exact motor as LMS1977 it is a handfull of power and there is no hill that im scared to shoot lol Quote Link to comment Share on other sites More sharing options...
lms1977 Posted November 4, 2013 Report Share Posted November 4, 2013 Im running a 10cub(465). That motor was in my hill climb bike. Didnt really have that much time on the motor before i decided to start building a drag chassis but anyway that motor never gave me any troubles for the time i had it on the hills. LMS1977 was running a 10serval 465. He beat the piss out of that motor on our hills for almost 3yrs with zero problems. Pabansheematt on here is running a 492 cheetah since like 2006. He has had some troubles with that but reconfigured the domes and it seems to be trouble free as of late. Hell, bluebanshee98 on here trail rides his dm611. Lol! As long as the motor is happy, and you can keep it cool. Your good to go I miss that motor If I were to do it again that would be the motor I would build Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.