Yanbansh04 Posted October 3, 2013 Report Share Posted October 3, 2013 Hi, I want to know if I can machine my big bore dome 12degres angle to get the blaster degres, because i have buy a set of dome with standard degres and I have blaster piston on my cub.. thank ! Quote Link to comment Share on other sites More sharing options...
Coupelx Posted October 3, 2013 Report Share Posted October 3, 2013 Since you have to buy some why not just get custom ones? No guess work. Quote Link to comment Share on other sites More sharing options...
m671054 Posted October 3, 2013 Report Share Posted October 3, 2013 Sure you can. Quote Link to comment Share on other sites More sharing options...
Yanbansh04 Posted October 3, 2013 Author Report Share Posted October 3, 2013 You mean I should buy blank dome and make them work ? Quote Link to comment Share on other sites More sharing options...
Coupelx Posted October 3, 2013 Report Share Posted October 3, 2013 No you call a builder or noss machine. Explain what you have and he cuts you a dome. Quote Link to comment Share on other sites More sharing options...
Yanbansh04 Posted October 3, 2013 Author Report Share Posted October 3, 2013 OKay thank, but if I just buy a set of dome blaster angle its okay ? Quote Link to comment Share on other sites More sharing options...
slobanshee Posted October 3, 2013 Report Share Posted October 3, 2013 Your making a usually simple thing way to painful Quote Link to comment Share on other sites More sharing options...
Coupelx Posted October 3, 2013 Report Share Posted October 3, 2013 Exactly. No guess no hassle. Icing on the cake. Quote Link to comment Share on other sites More sharing options...
m671054 Posted October 3, 2013 Report Share Posted October 3, 2013 If we were not distracted with your fucked up english you might get usefull answers. do you currently own domes of the correct bore and cc but for banshee pistons? if so do you own a lathe and have skills to use it? if any answer is no then go order domes set up for your motor. if all are yes then cut away. they probably wont turn out right and you will end up buying them anyway but the answer to your first question is yes. there is enough material in the done to switch angle and going from banshee to blaster you can keep the squish really close. Quote Link to comment Share on other sites More sharing options...
Yanbansh04 Posted October 3, 2013 Author Report Share Posted October 3, 2013 If we were not distracted with your fucked up english you might get usefull answers. do you currently own domes of the correct bore and cc but for banshee pistons? if so do you own a lathe and have skills to use it? if any answer is no then go order domes set up for your motor. if all are yes then cut away. they probably wont turn out right and you will end up buying them anyway but the answer to your first question is yes. there is enough material in the done to switch angle and going from banshee to blaster you can keep the squish really close. Yes my first question is if I can switch to a 9 degres if actually have 12* ( with the same dome, just customize (machined) it ) sorry for the english.. Quote Link to comment Share on other sites More sharing options...
mike0chek Posted October 3, 2013 Report Share Posted October 3, 2013 Your making a usually simple thing way to painful ^^^^^^^^^^ 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.