Brap_Life Posted September 30, 2013 Report Share Posted September 30, 2013 Finished a rebuild on a project 'shee, head was heli coiled pretty crudely, i time serted one stud insert out of necessity, passed on the other 9. 160lbs of compression upon assembly. 3 seconds of idle, opened the wick a few times and it backfires, blows my head studs out. The pro design head is salvageable i believe, but i need some cylinders. Or a whole top end kit. Stock bore right now, but if i could get big bore cylinders for the right price i can pick up a set of pistons. Would love a ported cylinder set with pistons to match. Could use plastics, could use stronger a arms. Have stock swingarm w/linkage if anyone needs it. also stock bore pistons i suppose if anybody needed them. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted September 30, 2013 Report Share Posted September 30, 2013 I have a fresh ported top end. When I say fresh it's never seen fuel. Outside of cylinders show polished. .020 over. Pm me Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted September 30, 2013 Report Share Posted September 30, 2013 I have a welded stock crank and ported stock cyls 64.50 pm me if Interested. Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted September 30, 2013 Report Share Posted September 30, 2013 Where u located Quote Link to comment Share on other sites More sharing options...
Brap_Life Posted September 30, 2013 Author Report Share Posted September 30, 2013 I am just north of Rockford Illinois for the time being. Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted September 30, 2013 Report Share Posted September 30, 2013 Ah ok. Too far from me. Quote Link to comment Share on other sites More sharing options...
Factory350 Posted September 30, 2013 Report Share Posted September 30, 2013 Got a rear shock. Stock. One lightly polished, and one completely polished with chrome spring, just rebuilt never used. Quote Link to comment Share on other sites More sharing options...
7211 Posted September 30, 2013 Report Share Posted September 30, 2013 I have stock cylinders non ported with pistons less than 2 hours on top end bored 60 over also have chariot cool head pm if interested I let the cylinders go cheap Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.