NEED cylinders/head(w or w/o pistons) could use plastics, rear shock, a arms

[Brap_Life]

Finished a rebuild on a project 'shee, head was heli coiled pretty crudely, i time serted one stud insert out of necessity, passed on the other 9. 160lbs of compression upon assembly. 3 seconds of idle, opened the wick a few times and it backfires, blows my head studs out. The pro design head is salvageable i believe, but i need some cylinders. Or a whole top end kit. Stock bore right now, but if i could get big bore cylinders for the right price i can pick up a set of pistons. Would love a ported cylinder set with pistons to match. Could use plastics, could use stronger a arms.

 

Have stock swingarm w/linkage if anyone needs it. also stock bore pistons i suppose if anybody needed them.

[sheerider1026]

I have a fresh ported top end. When I say fresh it's never seen fuel. Outside of cylinders show polished. .020 over. Pm me

[BeeCanBanshee]

I have a welded stock crank and ported stock cyls 64.50 pm me if Interested.

[dave5.0]

Where u located

[Brap_Life]

I am just north of Rockford Illinois for the time being.

[dave5.0]

Ah ok. Too far from me.

[Factory350]

Got a rear shock. Stock. One lightly polished, and one completely polished with chrome spring, just rebuilt never used.

[7211]

I have stock cylinders non ported with pistons less than 2 hours on top end bored 60 over also have chariot cool head pm if interested I let the cylinders go cheap