peak-j Posted September 21, 2013 Report Share Posted September 21, 2013 No markings on these a arms, can anyone verify that these are lsr a arms!!!? All i can tell you about them is that they are +2+1 and chrome. Thanks for any help Sent from my Motorola Electrify using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Finch Posted September 21, 2013 Report Share Posted September 21, 2013 Looks like it Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted September 21, 2013 Report Share Posted September 21, 2013 Yep that's deff what they look like Quote Link to comment Share on other sites More sharing options...
peak-j Posted September 22, 2013 Author Report Share Posted September 22, 2013 I guess next question is, did i get decent deal on them for $280 with brake lines. Id like to go ahead and put new bushings in, anybody sell a kit for the whole setup. I couldnt find anything on lsr website. Thanks guys! Sent from my Motorola Electrify using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
junkyarddog Posted September 22, 2013 Report Share Posted September 22, 2013 You can get a kit on eBay there the same a stock bushings I bought a full kit for 72 bux and they have poly red for 100 good luck Quote Link to comment Share on other sites More sharing options...
peak-j Posted September 22, 2013 Author Report Share Posted September 22, 2013 Awesome! Thanks for info Sent from my Motorola Electrify using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
peak-j Posted October 6, 2013 Author Report Share Posted October 6, 2013 Ok, I had to order new bushings, got them and the were to big O.D. and to big I.D. So I called lsr and sent a picture of these arms to them. They said they were theirs, so I ordered bushings. Couldn't get the guy to give me a measurement over the phone so I said go ahead and send them. They were a few thousandths to big O.D. and way big on I.D. I they would work with the factory pivot pipes, but the ones I got with the kit were smaller than stock. I contacted the guy I got them from and he said they were for sure lsr, just the older ones. Ended up going to ace hardware and got bronze bushings that were an exact fit!! I'm still curious if these are actually lsr arms though. Quote Link to comment Share on other sites More sharing options...
camatv Posted October 6, 2013 Report Share Posted October 6, 2013 need better pics.. LSR welds and fitment is perfect. and i mean perfect. any flaw at all they are not lsr. those look witht he pics you posted to maybe some other brand. what kind if att can you tell the ball joints.? you may need to measure the tube size for your bushings.... Quote Link to comment Share on other sites More sharing options...
Coupelx Posted October 6, 2013 Report Share Posted October 6, 2013 The top arms look odd. Are the tie rods heavy as hell and stainless? Quote Link to comment Share on other sites More sharing options...
peak-j Posted October 6, 2013 Author Report Share Posted October 6, 2013 Dont think they are stainless they are quite a bit bigger than stock. The upper a arms have one hell of a angle in them at the ball joint. I will get a pic after i get the rest of it bolted up. Nothing looks bent at all, it goes through the up and down motion fine, no binding or anything like that. I just dont like the looks of that upper a arm either! Sent from my Motorola Electrify using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
peak-j Posted October 6, 2013 Author Report Share Posted October 6, 2013 Dont mind the brake line, i still have to change it out. Here is a pic looking from the front and the balljoints it uses. Sent from my Motorola Electrify using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
peak-j Posted October 6, 2013 Author Report Share Posted October 6, 2013 Everything installed Sent from my Motorola Electrify using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.