bryan b Posted August 28, 2013 Report Share Posted August 28, 2013 Hey guys, working on a buddys banshee. New motor and trying to see what a good start point would be for jetting. Elevation 803 above 66mm bore, 4mil stroker, head milled 20 thousands, fmf sst pipes, +6 timing plate. Running belray h1r syn oil, pod style air filters, stock carbs, Stock porting. just looking for what ya all think will be a good start. also, we are going to Waynoka this weekend. The elevation change is from 803 to 1500 ish. If we are good at 803 is the increase to 1500 enough to have to rejet? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
kedge82 Posted August 29, 2013 Report Share Posted August 29, 2013 i run 280 mains 30 piloet with 66.5 pistons stock head not milled at 800 elevation and just got back from wisconson witch elevation was 1700 and needed to make no changes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.