Blazen582 Posted August 27, 2013 Report Share Posted August 27, 2013 4mil cheetha ported by Dan Hull. Here's what I have left. : Cylinders 73 bore, head, v-3 reeds with less than 20 passes, domes ( one has small pits), upp intakes and cases. Lower case half has been repaired (back corner on clutch side). Everything is in great shape, was complete running motor but the lower case half has been repaired. 875 shipped. Also have: N down 1-5 over ride cut by WCR 300 shipped Billet clutch basket with stock gear and small kicker gear. Has little play. 80 shipped Small flange out right side big bore chrome CPI's one repair on neck. 350 shipped Small flange out each side big bore shear chrome, one small ding on neck 400 shipped Three bar wheelie bar with adaptor for top bar to mount to stock frame, two lower bars mount to carrier bolts. Was set up for 8 over arm but top bar is slip.. 250 shipped 6 over swing round house Molly swing arm and Tyson wheelie bar ( no wheel) and strut 450 shipped I have pics of all can text them. 804 426-1562 Quote Link to comment Share on other sites More sharing options...
GNR101 Posted August 27, 2013 Report Share Posted August 27, 2013 pm on the trans Quote Link to comment Share on other sites More sharing options...
Blazen582 Posted August 27, 2013 Author Report Share Posted August 27, 2013 I was asked if trans was dunable... I called Greg at WCR and received info on trans by the numbers he stamps.. It is NOT dunable, and it was cut in 2009.. Guys I am open to offers and will split this stuff up anyway anyone wants.. Quote Link to comment Share on other sites More sharing options...
2sTrokeLove Posted August 28, 2013 Report Share Posted August 28, 2013 Payment sent on billet basket. Thanks. Quote Link to comment Share on other sites More sharing options...
Blazen582 Posted August 29, 2013 Author Report Share Posted August 29, 2013 UPDATE WITH PICS. http://s319.photobucket.com/user/blazen582/library/Cheetah 4mil cheetha ported by Dan Hull. Here's what I have left. :Cylinders 73 bore, head, v-3 reeds with less than 20 passes, domes ( one has small pits), upp intakes and cases. Lower case half has been repaired (back corner on clutch side). Everything is in great shape, was complete running motor but the lower case half has been repaired. 850 shipped.Also have:N down 1-5 over ride cut by WCR 300 shipped39 PWK's alky Carbs, cable, billet throttle, filters, and pump 320 shipped K&T billet pegs spacers and bolts Right has mark from lock up clutch cover see pic. 65 shipped.. Trinity stage IV billit adjustable timing plate 30 shipped. Brand new K&N filters and otter wears Bought for 38-40 carbs. 60 shippedSmall flange out right side big bore chrome CPI's one repair on neck. 325 shippedSmall flange out each side big bore shear chrome, one small ding on neck 400 shippedThree bar wheelie bar with adaptor for top bar to mount to stock frame, two lower bars mount to carrier bolts. Was set up for 8 over arm but top bar is slip.. 200 shipped6 over swing round house Molly swing arm and Tyson wheelie bar ( no wheel) and strut 450 shippedCan call or text804 426-1562 Quote Link to comment Share on other sites More sharing options...
Blazen582 Posted August 30, 2013 Author Report Share Posted August 30, 2013 UPDATE 2 with pics. If its not listed its sold.. http://s319.photobuc...library/Cheetah K&T billet pegs spacers and bolts Right has mark from lock up clutch cover see pic. 65 shipped.. Trinity stage IV billit adjustable timing plate 30 shipped. Small flange out each side big bore shear chrome, one small ding on neck 400 shipped Three bar wheelie bar with adaptor for top bar to mount to stock frame, two lower bars mount to carrier bolts. Was set up for 8 over arm but top bar is slip.. 200 shipped 6 over swing round house Molly swing arm and Tyson wheelie bar ( no wheel) and strut 450 shipped Can call or text 804 426-1562 Quote Link to comment Share on other sites More sharing options...
gartman8856 Posted October 7, 2013 Report Share Posted October 7, 2013 Send me pics on cylinder 3372508856 Quote Link to comment Share on other sites More sharing options...
Blazen582 Posted October 7, 2013 Author Report Share Posted October 7, 2013 Send me pics on cylinder 3372508856 Everything has been sold... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.