apeik Posted October 4, 2013 Author Report Share Posted October 4, 2013 small update, just ripped it around the building a few times, 60 pilots, 1.5 turns out on the airscrews, cel on 4th clip, 158 mains, absolute beast, at least upto third gear. Thanks jmadd for the pilot suggestion, and everyone for helping out. Now just to get it wide open and see what main i need. Quote Link to comment Share on other sites More sharing options...
J-Madd Posted October 4, 2013 Report Share Posted October 4, 2013 Well, normally you dial in the main first BUT the pilot will affect the fuel delivery at WOT too. Quote Link to comment Share on other sites More sharing options...
apeik Posted October 4, 2013 Author Report Share Posted October 4, 2013 well yea, but i wanted to get it close, and im pretty limited on space. I might try a 55 pilot with this same setup and see how it acts, right now it smokes pretty heavily -- but it does run great. Quote Link to comment Share on other sites More sharing options...
registered user Posted October 4, 2013 Report Share Posted October 4, 2013 ive used .043 on 92mm bores. didnt notice any strange combustion issues. if you have little squish clearance theres no fuel left for deto, correct ? Quote Link to comment Share on other sites More sharing options...
apeik Posted October 4, 2013 Author Report Share Posted October 4, 2013 from what ive read, id imagine to much squish band velocity could be a bad thing if you're not running high octane, but there's about a million people more qualified to answer this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.