pickerg1 Posted August 8, 2013 Report Share Posted August 8, 2013 OK.So I am doing a rebuild and its going to be .060 over with Wiseco pro lites. I also picked up a K&N filter with proflow adapter for stock airbox which is drilled with holes in it.I have stock reeds (should I replace these and how much are they) I picked up Toomey T5 exhaust (with silencers, the whole shot). The carb setup is a trinity 2 to 1 carb setup with a Keihin 35mm PWK carb attached. (I know its not ideal, but I don't have a big budget right now, just sold a house and lost my ass then bought another house). I am at about 580-600ft above Sea Level and ambient temps are around 75-85 degrees F. I'm looking to see if anyone can give me a baseline to work from in regards to jetting. Where to start. What pilot jet , main jet. I at least want to be in the ballpark and if anything error on the side of RICH than lean. I'd appreciate any help you guys can give.Thanks. Quote Link to comment Share on other sites More sharing options...
Sandking Posted August 8, 2013 Report Share Posted August 8, 2013 42 to 45 pilot eek or eej needle and plug chop from 185 main Quote Link to comment Share on other sites More sharing options...
pickerg1 Posted August 9, 2013 Author Report Share Posted August 9, 2013 Thanks sandking, I appreciate it. How do I tell if I have an eek or eej needle? Quote Link to comment Share on other sites More sharing options...
Sandking Posted August 9, 2013 Report Share Posted August 9, 2013 Read it on the needle it probably doesn't have one Quote Link to comment Share on other sites More sharing options...
98_shee Posted August 9, 2013 Report Share Posted August 9, 2013 If you decide to get a set of reeds lets know I have a set I think they are boyesen. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
pickerg1 Posted August 9, 2013 Author Report Share Posted August 9, 2013 My needle says DG. I don't know what to do about reeds, need advice Quote Link to comment Share on other sites More sharing options...
pickerg1 Posted August 9, 2013 Author Report Share Posted August 9, 2013 I stand corrected. DGK. I'll pick up an EEK or EEJ needle. Still dont know what to do about reeds. Here's what I got, I think its stock: Quote Link to comment Share on other sites More sharing options...
Sandking Posted August 9, 2013 Report Share Posted August 9, 2013 Reeds look fine or get some vf4's Quote Link to comment Share on other sites More sharing options...
pickerg1 Posted August 9, 2013 Author Report Share Posted August 9, 2013 Once again thanks sandking, I appreciate the help Quote Link to comment Share on other sites More sharing options...
pickerg1 Posted August 20, 2013 Author Report Share Posted August 20, 2013 Sandking - just wanted to say thanks. I put the Jets in you recommended and took her for a rip this past Sunday. It ran fantastic! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.