Screamin Banshee92 Posted July 26, 2013 Report Share Posted July 26, 2013 Hey all, so I installed the tors kit with the screws and I can't get it to idle with the screws I have them in all the way. It just seems like they don't reach the slides... How much do you need to file off. I just filed the new holes from an angle to a flat surface. Do I need to take more off? Also its very hard to start now.. it always started on a 2 or less kicks.. Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted July 26, 2013 Report Share Posted July 26, 2013 You have to file down more. Don't gotta go crazy do enough so when you turn the screw In it you can see the slide move up aka raise the idle Quote Link to comment Share on other sites More sharing options...
Screamin Banshee92 Posted July 26, 2013 Author Report Share Posted July 26, 2013 I can see the screw in the carb when I hold it wide open.. it just dont seem to be hitting slide. Quote Link to comment Share on other sites More sharing options...
tdod101 Posted July 26, 2013 Report Share Posted July 26, 2013 Are your slides in the right way ? And in the right carbs ? Quote Link to comment Share on other sites More sharing options...
Screamin Banshee92 Posted July 26, 2013 Author Report Share Posted July 26, 2013 So yea, I had the wrong slides on the wrong sides and backwards i guess.... feeling like a dumba$$ but switch it all around and runs great.. I did file it down some to so the screws went in more works good. .. Thanks for your help guys. 1 Quote Link to comment Share on other sites More sharing options...
tdod101 Posted July 26, 2013 Report Share Posted July 26, 2013 It happens, I'm guilty of it too as I'm sure most are Quote Link to comment Share on other sites More sharing options...
tylercaz99shee Posted July 27, 2013 Report Share Posted July 27, 2013 did the same exact thing with mine i was dumbfounded when i first fired it up with the removal kit and it would not idle lol Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted July 27, 2013 Report Share Posted July 27, 2013 LOL, I still have to take them apart and file them down more, screws don't hit the slides Quote Link to comment Share on other sites More sharing options...
ericdoedoe Posted July 28, 2013 Report Share Posted July 28, 2013 yoo were did u get the tors kit ??? im looking to get one Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted July 28, 2013 Report Share Posted July 28, 2013 any of our site sponsors carry them. I got mine through FAST (farmandsandtoys.com) Jeff will take good care of you Quote Link to comment Share on other sites More sharing options...
ericdoedoe Posted July 29, 2013 Report Share Posted July 29, 2013 cool thankss bro Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.