Jump to content

35mm PWK's 4mil Stock Cyld


Recommended Posts

Just bought these carbs, looking to run them through K&N pods on pump fuel on a 4 mil stock cylinder setup from HJR's dune/play port. CPI or shear pipes will be used, pro design cool head custom cut domes, i am about 600-1000ft above sea level. Can anyone tell me where I should start? and what series jets are these? I am used to the mikunis and the pwks are something I am just going to have to learn.

Link to comment
Share on other sites

Air strikers run a leaner pilot jet start off at 42 and see how she goes,160 main to start on fresh build I have had some good an bad results with cel needles really depends on state of motor d series needle always work better by me .leak down your motor and do plug and temp readings you won't regret it.

Link to comment
Share on other sites

that's right those airstrikers are a whole different animal than the pwk's

i know someone with 38 pilots and 142 mains cel needles

fmf fatties and dune port at sea level

That's the same jetting I'm at but with oof's, backyard port, and 5000ft elevation and pwk's.

 

Sent from my SGH-T679 using Tapatalk 2

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...