racerdonnie13 Posted July 1, 2013 Report Share Posted July 1, 2013 Im looking to build a stock frame banshee dragger for my wife, so its time to to let the drag blaster go. I built this bike at the beginning of last year so everything only has one season on it. (about 8 races) All parts were stripped down to bare metal, checked, cleaned and repainted. The bike ran flawless all season long with no issues. Here is what all is done to it. Fastest time i have ran with this setup was a 5.07 @ 60mph (300ft, Newtown dragway) I believe this bike has some high 4's with some more tuning and a light jockey. Asking $3000 or trade for banshee, banshee drag motor, or drag banshee rolling chassis. Trades + money (from either me or you) considered for non equal trades. - lightened frame- 1-5 Tyson override tranny- RDZ lock up clutch- billet clutch basket (not installed but comes with bike)- RDZ high HP clutch springs ( not installed but comes with bike)- lightened flywheel- adjustable timing plate- 05 blaster axle with rear disc brakes and all new carrier bearings and seals- banshee hubs with all new bearings and seals- lightweight douglas wheels- front skinny tires- Skat trak 20" 10 paddle extremes- Shearer custom pipes out of frame chrome drag pipe- CT racing 240 cylinder kit (73mm bore) fully drag ported and custom cut head by Flotek Racing- vitos 3mm crank with new crank bearings and seals- chromoly custom built +6 swingarm- front and rear custom chromoly adjustable struts- 40mm lectron carb (runs on methonal)- high flow pingle fuel valve- custom wheelie bar thats fully adjustable for tire size- tether kill switch- twist throttle- custom seat cover on shaved down seat- Vforce 3 reeds (uses 250R cage and reeds)- all new bearings and seals throughout the motor- custom chromoly steering stem and bars- Nology coil and hot wire Quote Link to comment Share on other sites More sharing options...
Nightmare Posted July 2, 2013 Report Share Posted July 2, 2013 Thats pretty neat, GLWS Quote Link to comment Share on other sites More sharing options...
Surfrjag Posted July 2, 2013 Report Share Posted July 2, 2013 bike runs hard, I seen it! keeps it rich, I know it can run faster Quote Link to comment Share on other sites More sharing options...
racerdonnie13 Posted July 2, 2013 Author Report Share Posted July 2, 2013 Thanks guys. There are videos of me running it on my youtube channel...same screenname Quote Link to comment Share on other sites More sharing options...
racerdonnie13 Posted October 30, 2013 Author Report Share Posted October 30, 2013 Still for sale... $2800 Does NOT include billet clutch basket or the rdz high hp springs anymore. Quote Link to comment Share on other sites More sharing options...
thats1banshee Posted December 5, 2013 Report Share Posted December 5, 2013 Location? Quote Link to comment Share on other sites More sharing options...
HotWheelsBanshee Posted December 6, 2013 Report Share Posted December 6, 2013 He's just outside of Richmond, VA... Quote Link to comment Share on other sites More sharing options...
thats1banshee Posted December 7, 2013 Report Share Posted December 7, 2013 Thanks. Thats too far from me. Quote Link to comment Share on other sites More sharing options...
willaduncan Posted February 24, 2014 Report Share Posted February 24, 2014 You should bring it down to the busco beach ride I might buy it if I see it run... Quote Link to comment Share on other sites More sharing options...
racerdonnie13 Posted March 4, 2014 Author Report Share Posted March 4, 2014 Its already half parted out. I still have the motor whole though. There are videos of it running on youtube. Quote Link to comment Share on other sites More sharing options...
camatv Posted March 19, 2014 Report Share Posted March 19, 2014 nice looking blaster. Quote Link to comment Share on other sites More sharing options...
racerdonnie13 Posted March 19, 2014 Author Report Share Posted March 19, 2014 Thanks. It was a fun bike for sure. Quote Link to comment Share on other sites More sharing options...
slingshot Posted April 27, 2014 Report Share Posted April 27, 2014 Do u still have to motor Sent from my SCH-I545 using Tapatalk Quote Link to comment Share on other sites More sharing options...
racerdonnie13 Posted May 6, 2014 Author Report Share Posted May 6, 2014 No its all been sold. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.