Jump to content

banshee wont spark


Recommended Posts

your machine is grounded through the exaust chrck them first then try putting spark plug in the boot and reaching it to the frame itself while some one kicks it over. if know spark there your stator is more then likley not grounded propperly or the wire is missed up. another thing you can do is check for continuity through plug wires to ignition coil and there is also a way totest the coil back to the stator. but i dont have my book with me and dont know right off hand

Link to comment
Share on other sites

ok will do  and i checked for continuity thru all the wires everything seems fine ieven checked the voltage from the stator and its fine  all the grounds r good as far as i can tell and the coil is good also it was bench tested  power is getting to the cdi but something is keeping the cdi from sending to the coil and idk wut it is and idk how to check if the coil is getting any power wen  u kick it over.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...