neeper2 Posted October 31, 2003 Report Share Posted October 31, 2003 how do you get the first start with new lectrons. i can't get fuel to go to the power jet to start it Quote Link to comment Share on other sites More sharing options...
fixitrod Posted October 31, 2003 Report Share Posted October 31, 2003 Pour a little into the cylinders and get it to pull that fuel in. Then you should be able to get it adjusted. The pilots are what limit you from starting it. Quote Link to comment Share on other sites More sharing options...
astromybud Posted November 1, 2003 Report Share Posted November 1, 2003 Pull the choke! The power jet will only pull fuel around WOT. Make sure you have the metering rod set corectly also. I have a single 38/40 on mine and the starting point is 2" from tip of rod to the bottom of the slide. Set rod at a point that will allow the motor to start and idle. Then adjust rod until you get a good crisp throttle responce. After you get the idle and mid dialed in do you go to selecting you power jet size. If you need more tech info give fastbygast a call. They are super cool and will set you on the right track. Cheers Astromybud Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.