cheezehead Posted October 30, 2003 Report Share Posted October 30, 2003 What lenght sould I go for a-arms I'm looking at the wicked prod. a-arms and I can get them in the +2+1 or +3+1 I'm kinda leaning towards the +3 most of my riding is MX and that sould put the bike at 49" in the front. Is there any real benefit for one over the other? Quote Link to comment Share on other sites More sharing options...
Blue Duece Posted October 30, 2003 Report Share Posted October 30, 2003 id go 2 wider and 2 forward..2+2 for mx with a -2 swingarm.....+3 is getting kinda wide, you could bounce down a rutted track that wide Quote Link to comment Share on other sites More sharing options...
evil Posted October 30, 2003 Report Share Posted October 30, 2003 most guys are running 2+1 or 2+2 on a mx track but the +3 would be bad ass in the desert Quote Link to comment Share on other sites More sharing options...
tats4life Posted October 30, 2003 Report Share Posted October 30, 2003 My front end is roll design, which is +3+1 gull wing design. My front end from outer edge of wheel to outer edge is 52 1/4 inches. I have to run 19in front shocks. If the a arms are not gull wing design, there's no point in getting that wide because you can't run a 19in front shock the ball joints will just bind up on the spindle. You want to make your front end as wide as your axle. I run a dominator +4. My shizzle handles damn good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.