bansheecaptain Posted May 16, 2013 Report Share Posted May 16, 2013 So im working on my uncles shee and it has no spark so I put in my working spare coil still no spark so I put in a working stator still nothing so I pluged in my cdi still nothing any ideas I cant see any damaged wires clueless need help asap Quote Link to comment Share on other sites More sharing options...
VoOK Posted May 16, 2013 Report Share Posted May 16, 2013 Check the pick up gap, should be around .018 - .020 if im not mistaken. Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 16, 2013 Author Report Share Posted May 16, 2013 Yea gap is at .019 and nothing Quote Link to comment Share on other sites More sharing options...
Starwriter Posted May 16, 2013 Report Share Posted May 16, 2013 Put the key in it and turn it on. If the key switch has been removed, connect the red/black wire to the black wire. Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 16, 2013 Author Report Share Posted May 16, 2013 Key is on haha thanks. Checked red and black wire at cdi and its open circuit Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted May 16, 2013 Report Share Posted May 16, 2013 On off switch still attached? If so check there I've seen a few go bad Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 16, 2013 Author Report Share Posted May 16, 2013 Yep still bad and checked at cdi plug for that as well black and blk/wht and its open as well. How do you eliminate on off switch next time ill try ill elim that and key and see if I get better result Quote Link to comment Share on other sites More sharing options...
J-Madd Posted May 16, 2013 Report Share Posted May 16, 2013 Unplugged TORS? Quote Link to comment Share on other sites More sharing options...
Starwriter Posted May 16, 2013 Report Share Posted May 16, 2013 For it to run, red/black key switch must be connected to black and the black/white kill switch wire must be open. Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 16, 2013 Author Report Share Posted May 16, 2013 Yes tors are off Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 16, 2013 Author Report Share Posted May 16, 2013 So if I unplug light/kill plug and blk/w wire ir will still start Quote Link to comment Share on other sites More sharing options...
ATV Galaxy Posted May 16, 2013 Report Share Posted May 16, 2013 sounds dumb but check the kill switch... sometimes the ground out and you wont get a spark Quote Link to comment Share on other sites More sharing options...
Starwriter Posted May 16, 2013 Report Share Posted May 16, 2013 So if I unplug light/kill plug and blk/w wire ir will still start Correct, but you still need to find out why there's no connection between the red/black wire and the black wire. That's your problem. Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 16, 2013 Author Report Share Posted May 16, 2013 Ill eliminate the key and try that and let you guys know thank you Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 17, 2013 Author Report Share Posted May 17, 2013 Well tried all your guys comments out and still nothing im stumped Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.