Stevv Posted May 13, 2013 Report Share Posted May 13, 2013 Need advice here. I just did a new top end on my 03 banshee. And I started jetting it and right now I'm at a 340 main, 27.5 pilot, needle in middle 2 turns out on the air screw. I just put the pilot in from stock and now the bike barely hits off the left cylinder and the right plug is a greyish tan color. My elevation is at 700ft. Mods are +5 timing, dune ported cylinders not sure who did it, cpi pipes in frame sb,stock carbs with k&n pods. Compression around 165 with chariot cool head and 18cc domes any help is appreciated! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.