two smoker Posted May 12, 2013 Report Share Posted May 12, 2013 Can some one point me in the right direction Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted May 12, 2013 Report Share Posted May 12, 2013 > you need to buy a tors remove/delete kit. it comes with, carb tops, throttle cable, idle screw and idle screw thread tap. most kits come with instructions. Quote Link to comment Share on other sites More sharing options...
two smoker Posted May 12, 2013 Author Report Share Posted May 12, 2013 OK is it better to do that or get new carbs Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted May 12, 2013 Report Share Posted May 12, 2013 http://farmandsandtoys.com/partdetail.asp?partid=123 there ya go. Quote Link to comment Share on other sites More sharing options...
Junkyshee Posted May 13, 2013 Report Share Posted May 13, 2013 Just get the kit, put mine on a couple weeks ago not real bad at all. Drilling and tapping idle screws is hardest part but it's overall pretty simple and so much easier to work on in there. Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted May 13, 2013 Report Share Posted May 13, 2013 he might want to just disconnect the TORs without upsetting the tune Quote Link to comment Share on other sites More sharing options...
Pastrykiller Posted May 13, 2013 Report Share Posted May 13, 2013 Tools Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted May 13, 2013 Report Share Posted May 13, 2013 lol Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted May 13, 2013 Report Share Posted May 13, 2013 he might want to just disconnect the TORs without upsetting the tune How would removing TORS upset the tune?? Quote Link to comment Share on other sites More sharing options...
Uf21 Posted May 13, 2013 Report Share Posted May 13, 2013 he might want to just disconnect the TORs without upsetting the tune How would removing TORS upset the tune?? Well the carbs get angry then upset because you removed it's cap. 1 Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted May 13, 2013 Report Share Posted May 13, 2013 lmfao! I was just trolling a bit to see if anyone would say anything, i`m putting a harley engine in my banshee Quote Link to comment Share on other sites More sharing options...
two smoker Posted May 13, 2013 Author Report Share Posted May 13, 2013 OK so should I put new carbs or just do removal kit Quote Link to comment Share on other sites More sharing options...
SpecialEd 05 Posted May 15, 2013 Report Share Posted May 15, 2013 Do the TORS kit. It's pretty simple and gives you a chance to clean out your carbs while you have them off. The hardest part is syncing the carbs and making sure the idle opening is even. Then you can run it up and set your idle. A little tip, every time you remove the carb tops you will need to resync the carbs later. Quote Link to comment Share on other sites More sharing options...
tdod101 Posted May 15, 2013 Report Share Posted May 15, 2013 Watch JLsparkys video on how to do it, I did it my self as well and it was quite easy Quote Link to comment Share on other sites More sharing options...
tdod101 Posted May 15, 2013 Report Share Posted May 15, 2013 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.