Abe Posted May 12, 2013 Report Share Posted May 12, 2013 So I've heard it both ways and I need to know if its OK to powder coat stock banshee a-arms? I know on the yfz and newer raptors that the upper ball joints have a plastic bushing that melts out and ruins them but was thinking it was ok to do the factory banshee stuff Quote Link to comment Share on other sites More sharing options...
Starwriter Posted May 12, 2013 Report Share Posted May 12, 2013 Yes, there is definitely plastic in the ball joints. Yes it will melt. Some people have done it successfully by positioning them so the ball joint stud faces up and the plastic supposedly hardens back without running out onto the floor. Some people claim that the powder can be cured with heat lamps. Personally, I would never risk my life on resolidified plastic in the ball joints. Either paint them, chrome them, or buy aftermarket arms. Quote Link to comment Share on other sites More sharing options...
Abe Posted May 12, 2013 Author Report Share Posted May 12, 2013 Thanks starwriter, so all the OEM Yamaha bj have the plastic ? Quote Link to comment Share on other sites More sharing options...
Starwriter Posted May 12, 2013 Report Share Posted May 12, 2013 All Banshee arms do. Don't know about any opthers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.