d4n1932 Posted May 10, 2013 Report Share Posted May 10, 2013 I have a completely stock banshee I am taking off the air box lid and putting on lrd ajustable full pipes with the muffler shortend by 3in. What do I need for pilot main and needle position? Any experienced tunners please help!!! 88ft elevation and 70-90 degrees Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted May 10, 2013 Report Share Posted May 10, 2013 320 main is high don't you think for just pipes and no lid. I would think a 260 main. But I could be wrong. Quote Link to comment Share on other sites More sharing options...
Zillaguy Posted May 10, 2013 Report Share Posted May 10, 2013 27 pilot and 290 main, middle clip, 1.5 turns out on pilot air screw. Thats what i ran with pods and FMF golds on stock carbs.. It was perfectly jetted.... Quote Link to comment Share on other sites More sharing options...
ECshee Posted May 10, 2013 Report Share Posted May 10, 2013 27 pilot and 290 main, middle clip, 1.5 turns out on pilot air screw. Thats what i ran with pods and FMF golds on stock carbs.. It was perfectly jetted.... Damn close right there. I ran almost the same jetting on my stocker with airbox, K&N and t5's. 300 mains though i think....if i remember correctly, but we know how that goes... Quote Link to comment Share on other sites More sharing options...
ECshee Posted May 10, 2013 Report Share Posted May 10, 2013 Want some cheap pods to run? No outerwears and not in the BEST condition but runable for a trail bike. Quote Link to comment Share on other sites More sharing options...
d4n1932 Posted May 11, 2013 Author Report Share Posted May 11, 2013 Want some cheap pods to run? No outerwears and not in the BEST condition but runable for a trail bike. Quote Link to comment Share on other sites More sharing options...
d4n1932 Posted May 11, 2013 Author Report Share Posted May 11, 2013 No thanks I want somewhat water protection.. But I am going to change the pipes this weekend and I will let you all know how it goes...I'm gona check the needle I think stock is middle clip but I want to check it and I have 27.5 pilot so I'm gona try it and I have a few mains ill start with 290. Thanks everyone beecanbanshee get my jets ready lol Quote Link to comment Share on other sites More sharing options...
ECshee Posted May 11, 2013 Report Share Posted May 11, 2013 I really just want to get rid of them haha. i already have replacements. Shitll buff out, your on the right track Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted May 11, 2013 Report Share Posted May 11, 2013 I got jets only reason I thought 310 was high cause I have lrd pipes pods and some other shit and the 300 mains where rich for me. Quote Link to comment Share on other sites More sharing options...
d4n1932 Posted May 11, 2013 Author Report Share Posted May 11, 2013 I really just want to get rid of them haha. i already have replacements. Shitll buff out, your on the right track Well I give u my address if u wana just get rid of them lol Quote Link to comment Share on other sites More sharing options...
d4n1932 Posted May 11, 2013 Author Report Share Posted May 11, 2013 I need to polish my pipes what is a good method and product Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted May 11, 2013 Report Share Posted May 11, 2013 There's a shit load of threads in the appearance section noob haha 1 Quote Link to comment Share on other sites More sharing options...
d4n1932 Posted May 11, 2013 Author Report Share Posted May 11, 2013 There's a shit load of threads in the appearance section noob haha Shut up fag I have my own section here lol lets work on the bikes tonight Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted May 11, 2013 Report Share Posted May 11, 2013 Haha yea ill be at kennys workin on my bike. Quote Link to comment Share on other sites More sharing options...
Uf21 Posted May 14, 2013 Report Share Posted May 14, 2013 i always give a higher jetting then what peeps usually end up with... its a SAFE recommendation that way if someone goes and tries it they dont melt down the bike... its always safe and easy to start rich and work your way down. too many variations come into play to give a "exact" number....290's may work for some but lean for others etc... ok well give me an accurate jetting for this setup Mods: DMC 916 pipes, K&N filter with lid on, stock carbs and stock everything else. Elevation: 3000-4000 above sea level. Tempertaute where I ride: 45-60F My current jetting: 280 mains and pilots is at 27.5, dont know what needle is at. Im not going to change my jetting but want to know if im close to the right jetting since I cant do my own plug chop. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.