sirreed Posted May 2, 2013 Report Share Posted May 2, 2013 So been doing a slow build up on a stock banshee and I realized all my other quads use a 4/110 rear bolt pattern. My question is beyond after market, are there any stock rear hubs that are 4/110 that fit a stock Shee axle? By doing this conversation, i will be saving myself some coin (if the hubs exists) BAN565- gave me some incite (Thank you again)Bear Tracker and another quad use the 4/110 pattern. is there any other or anything some one has tryed???? Quote Link to comment Share on other sites More sharing options...
Starwriter Posted May 2, 2013 Report Share Posted May 2, 2013 4/110 is a common Honda pattern. There are definitely aftermarket hubs that will fit Banshee axle with that pattern. Don't know about anything OEM. Here is a great wheel bolt pattern chart. http://www.mud-throwers.com/atv_wheel_chart Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted May 2, 2013 Report Share Posted May 2, 2013 Blaster hubs will work. Quote Link to comment Share on other sites More sharing options...
Starwriter Posted May 2, 2013 Report Share Posted May 2, 2013 Blaster hubs will work. Blaster hubs are 4/100 Quote Link to comment Share on other sites More sharing options...
sirreed Posted May 2, 2013 Author Report Share Posted May 2, 2013 GREAT CHART THANK YOU! 4/110 is a common Honda pattern. There are definitely aftermarket hubs that will fit Banshee axle with that pattern. Don't know about anything OEM. Here is a great wheel bolt pattern chart. http://www.mud-throwers.com/atv_wheel_chart Quote Link to comment Share on other sites More sharing options...
sirreed Posted May 2, 2013 Author Report Share Posted May 2, 2013 Blaster hubs are 4/100 Sadly yes Quote Link to comment Share on other sites More sharing options...
racerdonnie13 Posted May 2, 2013 Report Share Posted May 2, 2013 Maybe check out the g-force hubs. they might offer something. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted May 2, 2013 Report Share Posted May 2, 2013 Blaster hubs are 4/100 Well crap...I read that to fast, sorry 'bout that. Quote Link to comment Share on other sites More sharing options...
sirreed Posted May 2, 2013 Author Report Share Posted May 2, 2013 Well crap...I read that to fast, sorry 'bout that. No problem.....I wish blaster Hubs where 110 i get a set in a heart beat LOL Quote Link to comment Share on other sites More sharing options...
WINDYCITYJOHN400 Posted May 2, 2013 Report Share Posted May 2, 2013 I had a Honda 400EX and we needed to make Banshee wheels fit on the rear. (I didn't want to buy Honda wheels for paddles.) I just put Banshee hubs on the Honda axle. (The splines are all the same.) So in your case, I would just get some stock Honda hubs (4/110) and swap them for your Banshee ones. Can't cost much at all on Ebay. I think hubs are like $12..... Quote Link to comment Share on other sites More sharing options...
sirreed Posted May 2, 2013 Author Report Share Posted May 2, 2013 Maybe check out the g-force hubs. they might offer something. Sweet i will get on that. any recommendations on where to get G-force hubs from? Quote Link to comment Share on other sites More sharing options...
sirreed Posted May 2, 2013 Author Report Share Posted May 2, 2013 I had a Honda 400EX and we needed to make Banshee wheels fit on the rear. (I didn't want to buy Honda wheels for paddles.) I just put Banshee hubs on the Honda axle. (The splines are all the same.) So in your case, I would just get some stock Honda hubs (4/110) and swap them for your Banshee ones. Can't cost much at all on Ebay. I think hubs are like $12..... FREAKING SWEEEEEETTTTTTTT now thats the E-ticket ride!!!! Quote Link to comment Share on other sites More sharing options...
gomerkfx700 Posted May 2, 2013 Report Share Posted May 2, 2013 Yes Honda Yamaha are the same I had a set of each for my kfx700 so me and my Buddy's could all swap tires. Also you may run into spacer problems one if them I can't remember witch needs a spacer for the nut yo tight in up on the kfx but it may not be a problem on the banshee 1 Quote Link to comment Share on other sites More sharing options...
sirreed Posted May 2, 2013 Author Report Share Posted May 2, 2013 Yes Honda Yamaha are the same I had a set of each for my kfx700 so me and my Buddy's could all swap tires. Also you may run into spacer problems one if them I can't remember witch needs a spacer for the nut yo tight in up on the kfx but it may not be a problem on the banshee Just called a friend whom has a set laying around and is giving them to me for FREEEEEEE hell ya! Thanks againg guys for your help. soon ill be posting picks of my build in the correct forum of course!!! Quote Link to comment Share on other sites More sharing options...
Starwriter Posted May 3, 2013 Report Share Posted May 3, 2013 Good job. Free is always good. Unless it comes with the payback of helping him next time he moves. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.