stu Posted October 29, 2003 Report Posted October 29, 2003 i have just had Sainty port my engine with a mx port and now need to jet my shee correctly. but i want to get the HQ's opinion on what sizer jets to run. here is a list of mods which affects the jetting: keihin pwk 35's K&N in open airbox pyramid reeds & cages (boost bottle!!) pro-x .5 over pistons duncan coolhead with about 20.5/21 cc domes Mx port by Martin Saint DMC alien pipes +4 timing hopefully ive remembered everything. help would be greatly recieved as i dont want to run too small jets then realise only when shee comes to a seized stop!! cheers stu Quote
Banchetta Posted October 29, 2003 Report Posted October 29, 2003 I'd start w/ a 180 main and 55 pilot and go from there. Do a plug check at wot in 6th gear for 5-10 seconds and adjust the mains to that. Adjust the air screws and see where they like to be. Adjust the pilots according to that.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.