Joejr915 Posted April 22, 2013 Report Share Posted April 22, 2013 What's for best expoxy do you guys use for case work underneath the crank? Where do you get it at? Quote Link to comment Share on other sites More sharing options...
BLOODRAGE Posted April 22, 2013 Report Share Posted April 22, 2013 Not sure what the pros use but I recently used jb epoxy for my T-Rex build and has held up pretty good, Fixed 2 holes in my cases and my jug doesn't match up on the block at all,so far so good I call it My 10mil epoxy build lol Quote Link to comment Share on other sites More sharing options...
rubberneck Posted April 22, 2013 Report Share Posted April 22, 2013 I have used this stuff http://www.moroso.com/catalog/categorydisplay.asp?catcode=22001 I have also used devcon Quote Link to comment Share on other sites More sharing options...
milto29 Posted April 22, 2013 Report Share Posted April 22, 2013 JB Weld will hold up just fine . Quote Link to comment Share on other sites More sharing options...
Joejr915 Posted April 23, 2013 Author Report Share Posted April 23, 2013 What type devcon epoxy do you use Quote Link to comment Share on other sites More sharing options...
camatv Posted April 23, 2013 Report Share Posted April 23, 2013 moroso a+b works great and will hold up to alky. if its just a gas motor repair jb weld.. i havent used the devcon due to the 50-80 bucks for the alluminum epoxy/ i think it pours easier tho. a+b moroso stays pretty stiff Quote Link to comment Share on other sites More sharing options...
m671054 Posted April 23, 2013 Report Share Posted April 23, 2013 Devcon has 2 that work good they have aluminum liquid f2 that is pourable and another that is thicker ( forget the name of it). i got mine from fastenal. Quote Link to comment Share on other sites More sharing options...
robert0762 Posted April 23, 2013 Report Share Posted April 23, 2013 I have a set of cases that have a small crack on the back side top case clutch side . The crack is about 5/8 of an inch long . I want to epoxy it on the inside which will be soaked in oil at all times . What would be good to use for this? Quote Link to comment Share on other sites More sharing options...
Whitbread Posted April 24, 2013 Report Share Posted April 24, 2013 This is what honda uses at their engine plant to fix porosity in castings. You know it must be good shit to be used at oem level. Good friend of mine works there and turned me onto the stuff. http://www.restockit.com/1-lb-aluminum-putty-fhard-5300n-(230-10610).html?ci_src=17588969&ci_sku=230-10610&source=IDx20111014x00001g&utm_source=IDx20111014x00001g&utm_medium=paid&utm_campaign=comparison&utm_term=230-10610&bvar10=googlepla Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.