SpecialEd 05 Posted April 20, 2013 Report Share Posted April 20, 2013 So I finally got the Shee back together and ran a bit over a tank through it yesterday. I went up in jets as I went to lid off with a Pro Flow foam setup, +4 timing, billet manifolds, VF3's, TORS removal, Chariot head with 21cc domes, Wiseco Pro-Lites and Toomey T6's. I based my jetting on the "What jets are you using?" thread and wend with 320 mains and 27.5 pilots. I'm really happy with how it runs, no bogging or hesitation whatsoever. My only gripe is that when trying to cruise up to mid throttle it seems to burble and sputter but pin the throttle from there and it rips. I played with the air screw a bit and seemed, to me, the be a little better screwing the airscrew out (leaner) to 2 turns. I know it's the nature of a 2 stroke so am I expecting to much to be able to cruise nicely on the trails? Is this just normal? Because I was feeling it may be a bit rich on the pilot. Quote Link to comment Share on other sites More sharing options...
SpecialEd 05 Posted April 20, 2013 Author Report Share Posted April 20, 2013 Currently running the Toomey needle at the 4th groove down. Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted April 23, 2013 Report Share Posted April 23, 2013 Drop the needle and see if she clears up and plug chop it 320 is rich for no porting and t6s Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.