forrest411 Posted April 17, 2013 Report Share Posted April 17, 2013 I have burgaurd +2+1 A arms on my banshee and I need new bushings and a couple sleeves. I have left messages for burgard and I never get a call back. The bushing that were in these were a rubber busing. The problem is that the inside diameter of the arm is smaller than the stock bushing and the sleeves that they use are also smaller in diameter. I found 3/4 brass bushings at the local hardware store that fit the arms perfect, but I cannot find anything that will work for the sleeves. I could possible drill out the bushings to accept the stock sleeves. Anyone know who I can get a set of sleeves from? Quote Link to comment Share on other sites More sharing options...
forrest411 Posted April 19, 2013 Author Report Share Posted April 19, 2013 Nobody? Quote Link to comment Share on other sites More sharing options...
thomas h. Posted April 19, 2013 Report Share Posted April 19, 2013 Besides the dealer ship or used, most of the arms that use bushings don't send new one they expect your to use your own. Quote Link to comment Share on other sites More sharing options...
thomas h. Posted April 19, 2013 Report Share Posted April 19, 2013 Maybe a wanted ad will get you your parts Quote Link to comment Share on other sites More sharing options...
forrest411 Posted April 19, 2013 Author Report Share Posted April 19, 2013 The reason I posted it here was because I checked with different companies and it seems that these arms use different size bushings and sleeves that any other arm on the market. I figured that someone may have run across this problem before. I guess I will have to find a machine shop that can turned down a stock set of sleeves to fit the bushings. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted April 19, 2013 Report Share Posted April 19, 2013 If you cant find a machine shop that wants to mess with it. i could do either option for you, either turn the stock bushings or ream the brass bushings out. Quote Link to comment Share on other sites More sharing options...
forrest411 Posted April 19, 2013 Author Report Share Posted April 19, 2013 What would it cost to ream out the brass bushings?. I only need 2 bushings reamed out Quote Link to comment Share on other sites More sharing options...
Coupelx Posted April 19, 2013 Report Share Posted April 19, 2013 Probably $20 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.